Proteus SR - A1 & A2 Aluminium Rainscreen Cladding
Verified by manufacturer 2 months ago
Proteus SR is a secret fix hook rainscreen system that is available in aluminium and steel
Application
Can be installed on any type of wall construction.
Description
Proteus SR is an A1 or A2 metal rainscreen cladding system that is available in a multitude of materials and finishes, including Aluminium, Stainless Steel and Weathering Steel.
Proteus SR is a secret fix rainscreen system that is available in a multitude of materials and finishes, including Powder Coated Aluminium, Pre Coated Aluminium, Anodised Aluminium, Stainless Steel, Powder Coated Steel and Weathering Steel.
The versatility of the Proteus SR rainscreen system allows the material thickness to be from 1.5 mm to 5.0 mm. Designers have the freedom using the Proteus SR system to lay panels in vertical, horizontal or a combination of both orientations. Standard 20 mm vertical and horizontal joints provide a clean and effortless sightline to your facade.
The panels fix to a carrier rail with hooks at engineered centres. The hooks bolt into predesigned ports within the vertical rails rather than using self-drilling fixings, which offer maximum site adjustability and construction tolerance.
Vertical rails connect to support brackets engineered to a depth specific to your project with accompanying thermal isolator pads, allowing the system to be connected to all types of primary structures, including blockwork, precast concrete, timber frame, SIPS panels, SFS and insulated steel panels.
Secondary horizontal rails may be required, subject to the project’s framing system. This flexibility assists in reducing installation periods and offers maximum flexibility for new build, refurbishment and cladding remediation projects.
Features and benefits:
- Proteus SR is ideal for refurbishment and replacement cladding projects.
- Sleek and modern appearance.
- All panels assembled at our factory are pre-finished for rapid installation.
- Stud or spot-welded mid-span supports.
- Material can be broken down and fully recycled.
- Variety of insulation depths for thermal and acoustic requirements.
- Classified A1 or A2-s1, d0 in accordance with EN13501.
- Fully tested and compliant with CWCT standards.
General information
Finish | Anodized Brushed Polished Powder-coated Coated |
Material | Aluminium Stainless steel |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Ten year Guidance for specification option: Extended warranties are available. |
Uniclass | |
CAWS | H92/120 Rainscreen cladding |
Specification data - Drained and back-ventilated rainscreen cladding systems
System performance | Rainscreen cladding system design. |
Thermal insulation | To suit u-value requirements. |
Breather membrane | |
Material | Manufacturer guidanceIf breather membrane required by insulation manufacturer, insert material. |
Fasteners | Manufacturer guidanceIf breather membrane required, insert fastener type. |
Secondary support structure | Proteus extruded aluminium rail system with Standard Proteus SR® system secret fix hook brackets to rear of cladding panels, and continuous mullion section around all openings to support panel edges.Guidance for specification option: To suit project specific loads, spans and cladding zone depth. Contact manufacturer for standard drawings or request meeting with architectural advisor. |
Cavity fire barriers | |
Horizontal | Horizontal Cavity Barriers by others.Guidance for specification option: As specified by a fire engineer. |
Vertical | Vertical Cavity Barriers by others.Guidance for specification option: As specified by a fire engineer. |
Cladding panels | |
Material | 2.0 mm Aluminium.3.0 mm Aluminium.4.0 mm Aluminium.5.0 mm Aluminium.1.5 mm Stainless steel.2.0 mm Stainless steel.3.0 mm Stainless steel.2.0 mm Weathering steel.3.0 mm Weathering steel.4.0 mm Weathering steel. |
Panel joints | 20 mm recessed closed joints to match panel face.Guidance for specification option: Other joint widths/types are possible, please consult manufacturer. |
System accessories | Not required.Louvres.Louvred doors.Secret doors.Perforated screens.Fins.Other. |
System completion | Maintenance and replacement |
Finish | Rimex ColourTex. Rimex Patterned. Rimex Granex. Rimex Metal Art. Rimex Super Mirror. |
Colour | Manufacturer guidanceConsult manufacturer and insert requirement. |
Reaction to fire | To EN 13501-1, Class A2-s1, d0. Guidance for specification option: Anodised aluminium, PPC aluminium, Pre-coated aluminium, Zinc. To EN 13501-1, Class A1. Guidance for specification option: Stainless steel, Weathering steel, Copper alloy, Zinc. |
Samples required | None. Finish samples. System samples. Mock-ups or prototypes. Guidance for specification option: If system requirements not fully explored and agreed prior to specifying. Identify scale and purpose of mock-up, e.g. to agree interface details with other trades, etc. |
Sustainability data
Recyclability | Metal products can be broken down and recycled Manufacturer guidanceAll materials, other than adhesives, can be recycled at end of life. |
BIM objects
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 2 |
 IFC | - | 2 |
Similar products from Proteus Facades
Proteus HR - Metal Rainscreen Cladding
Proteus SR ACM Metal (Secret Fix ACM Rainscreen System) - Drained and Back-ventilated Cladding