Proteus Pro-Living® DR8 - Drainage Layer
Verified by manufacturer 24 days ago
A flexible protection and drainage layer suitable for subterranean foundation walls, tanking and basement construction.
Application
- Suitable for subterranean foundation walls, tanking and basement construction.
- Can be bonded together to create one seamless watertight layer
- Can be fitted to floors to act as a vapour barrier and a damp-proof layer.
Description
Proteus Pro-Living® DR8 is a flexible protection and drainage layer suitable for subterranean foundation walls, tanking and basement construction. The 8 mm deep cups provide an air gap between the concrete structure and the backfill. Water runs down the outer surface towards a drain at the bottom of the structure.
Proteus Pro-Living® DR8 creates a permanent air gap when fixed to surface walls and floors, preventing hydrostatic pressure and helping to ventilate the structural wall.
Features and benefits:
- Made from high density polyethylene (HDPE).
- Lightweight, flexible and durable.
- Protects waterproofing membranes from abrasion or puncture.
- Dimpled “egg-box” profile gives high compression strength.
- High tearing and impact resistance.
- Rot-proof, safe for drinking water.
- Supplied in rolls of 2 x 20 m.
General information
Color | Black |
Finish | Semi-gloss |
Material | High density polyethylene (HDPE) |
Shape | Rectangle |
Length | 20000 mm |
Width | 2000 mm |
Height | 8 mm |
Warranty description | Other |
Uniclass | |
CAWS | Q37/340 Moisture retention mat Q37/350 Drainage layer |
Specification data - High-density polyethylene (PE-HD) studded sheets
Filter layer | Manufacturer guidanceInsert requirements or omit. |
Stud height | 8 mm. |
Weight (minimum) | 0.55 kg/m² (±10%). |
Colour | Black. |
Performance characteristics | |
Flow rate | 4.6 litres per m2. |
Fire performance | To DIN 4102, B2.Manufacturer guidanceB1 available by special request, consult manufacturer. |
CompressiveStrength | 250 kN/m2. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 1.26 kg CO₂ eq/m² |
Recyclability | Product is fully recyclable |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Literature
Product Data Sheet - Proteus Pro-Living® DR8
Case studies
Case Study - Proteus Cold Melt® & Proteus Pro-Living® - Cygnet Hospital
Case Study - Proteus Cold Melt® & Proteus Pro-Living® - KBS Builders Ltd, Greenwich
Similar products from Proteus Waterproofing
Proteus Pro-Living® DR20 - Drainage Layer