Proteus Pro-Felt Endura AVCL Sanded - Bituminous AVCL
Verified by manufacturer 5 months ago
BBA Agrément Certificate
Certificate type
A torch-applied, bituminous vapour control layer for use in roof waterproofing systems.
Application
Proteus Pro-Felt® Endura AVCL is designed for use as a vapour barrier membrane and is particularly suitable for use as part of a torch-on roofing system. It can be applied to a wide range of non-combustible substrates, including metal and concrete decks, subject to use of a suitable primer as required.
Description
Proteus Pro-Felt® Endura AVCL is a torch-applied, bituminous vapour control layer which is saturated and coated with high quality SBS (Styrene-Butadiene-Styrene) modified bitumen. It has a 60 g/m² aluminium and glass fleece reinforcement, a thermofusible polyethylene film on the underside and is finished on the top surface with quartz sand. The product features an aluminium reinforcement which is resistant to alkali and corrosion.
Features and benefits:
- Torch-on application.
- Low temperature flexibility at -18°C.
- Aluminium reinforced.
- SBS modified bitumen.
- Rapid, simple installation.
- Complies with EN 13707:2004.
Proteus Pro-Felt® Endura AVCL should be installed in accordance with manufacturer recommendations and all relevant national standards and codes of practice, including BS 8217:2005 – the code of practice for reinforced bitumen membranes for roofing.
General information
Finish | Manufacturer guidanceSanded. |
Material | Bitumen Glass Fibre Aluminium Felt |
Length | 7500 mm |
Width | 1000 mm |
Height | 3.5 mm |
Warranty description | 30 year |
Uniclass | |
CAWS | J41/14 Reinforced bitumen membrane inverted roof covering J41/395 Air and vapour control layer J41/120 Built-up reinforced bitumen membrane inverted roof covering J41/110 Built-up reinforced bitumen membrane warm deck roof covering J41/400 Built-up reinforced bitumen waterproof covering J41/10 Reinforced bitumen membrane warm deck roof covering |
Specification data - Reinforced bitumen roofing sheets
Standard | To EN 13707:2004. |
Performance characteristics | Reaction to fire to DIN EN 13501-1, Class E. |
Material | |
Carrier material | Glass fibre and aluminium composite. |
Bitumen modification | Elastomeric. |
Thickness (minimum) | 3.5 mm. |
Weight (minimum) | 5.0 kg/m². |
Surface finish | |
Top | Sanded. |
Underside | Thermofusible polyethylene film. |
Third-party certification | British Board of Agrément (BBA) Certificate.Guidance for specification option: BBA-certified for use with the Proteus Pro-Felt Endura roof waterproofing system. |
Tensile force | To DIN EN 12311-1, ≥ 400/400 N. Manufacturer guidanceMaximum. |
Elongation | To DIN EN 12311-1, 2/ 2%. |
Flexibility at low temperature | To DIN EN 1109, ≤ -20°C. |
Watertightness | To DIN EN 1928 Method B, passed at 100 kPa. |
Water vapour transmission properties | To DIN EN 1931, sd ≥ 1.500 m. |
Third party certifications
BBA Agrément Certificate
BBA - Proteus Pro-Felt® Endura
Literature
Product Data Sheet - Proteus Pro-Felt® Endura AVCL
Material Safety Data Sheet - Proteus Pro-Felt® Endura AVCL
Similar products from Proteus Waterproofing
Proteus Hot Melt® Anti-Root Capsheet - Waterproofing Membrane
Proteus Hot Melt® Capsheet - Waterproofing Membrane
Proteus Pro-Felt 'Ultima-Plus' Mineral - Torch-on Elastomeric Waterproofing
Proteus Pro-Felt 'Ultima-Plus' Sanded Underlay - Torch-on Fibreglass Plastomeric Membrane
Proteus Pro-Felt 3mm Plain Underlay - Torch-on Reinforced Bitumen Membrane
Proteus Pro-Felt Endura Mineral - Bituminous Cap Sheet
Proteus Pro-Felt Endura SA AVCL Sanded - Bituminous AVCL
Proteus Pro-Felt Endura SA Mineral - Bituminous Cap Sheet
Proteus Pro-Felt Endura SA Underlay Sanded - Reinforced Bitumen Membrane
Proteus Pro-Felt Plain Dispersion Underlay - Torch-on Reinforced Bitumen Membrane