ProScreed X Levelling Screed
Verified by manufacturer 7 months ago
A two-component cold liquid-applied resin.
Application
Suitable for localized infilling and levelling of concrete structures prior to the installation of Zero Falls PermaQuik waterproofing system.
Heavy duty, water free and ultra-fast curing ProScreed X can also be used as a levelling screed or a repair mortar on cementitious and other substrates, which must be primed prior to the application.
Description
PermaQuik ProScreed X is a two-component cold liquid-applied resin-based levelling screed.
Features and benefits:
- Can be installed over PermaQuik waterproofing.
- Heavy duty, water free and ultra-fast curing.
- Moldable.
- Chemical and UV resistant.
- Solvent and isocyanate free.
- Mechanically resistant and water resistant.
- High compressive strength of circa 60 N/mm² with a density of approximately 2.10 kg/mm/m².
- Tool cleaning: Clean tools with ProScreed X Cleaner.
- Delivery conditions: ProScreed X R Resin 2 kg drum, ProScreed X Filler 23 kg bag.
- Storage (shelf life): Store unopened in a cool, dry, well ventilated place above freezing, out of direct sunlight and in the original container. Shelf life if stored correctly: minimum six months.
- Refer to Safety Data Sheets for Health and Safety information and recommended EWC waste codes.
General information
Finish | Smooth |
Material | Resin Other Guidance for specification option: Dibenzoyl peroxide; methyl methacrylate; 2-ethylhexyl acrylate; aliphatic urethan acrylate; ethyl methacrylate. |
Shape | Formless |
Uniclass | |
CAWS | M10/7 Proprietary quick drying levelling screeds M10/160 Proprietary self smoothing levelling screeds |
Specification data - Self-smoothing levelling screed mixes
Classification data | |
Mix | Manufacturer's standard. Guidance for specification option: Thoroughly mix the ProScreed X R resin in the drum with a slow speed mixer until the resin achieves a uniform consistency; If required, decant a measured weight of resin into a suitable container. Pour the ProScreed X R resin into a clean mixing bucket and add the ProScreed X Filler in the ratio 11.5 parts filler to 1.00 part resin (by weight) by slowly pouring the ProScreed X Filler into the ProScreed X R resin and thoroughly mixing with a slow speed mixer for at least 2 minutes and until the mixture achieves a smooth, uniform consistency and buff colour. Use the mixed material within the pot life. |
Preparation | Manufacturer's standard. Guidance for specification option: Ensure that the substrate is clean, dry and free from dust, laitance, grease, oil and any other contaminants and assess/ pre-treat/ prepare substrate in accordance with Radmat Specification. Prime in accordance with Radmat Specification. |
Ambient temperature | 0-35°C. |
RelativeHumidity | Up to 95%. |
CondensingTemperature | 3°C above dew point. Manufacturer guidance/ Dew point: |
Curing time | Rainproof = 30 minutes; Can be walked on or over coated = 45 minutes; Able to withstand stress = 1 hour. Manufacturer guidance(Approximates): |
Delivery condition | ProScreed X R Resin 2 kg drum, ProScreed X Filler 23 kg bag. |
CompressiveStrength | 60 n/mm². Manufacturer guidance(approximate) |
Density | 2.10 kg/mm/m². Manufacturer guidance(approximate) |
Sustainability data
Material | Resin Other Guidance for specification option: Dibenzoyl peroxide; methyl methacrylate; 2-ethylhexyl acrylate; aliphatic urethan acrylate; ethyl methacrylate. |
Literature
ProScreed X Resin - Safety Data Sheet
ProScreed X Filler - Safety Data Sheet