Pro-Bond Foaming - Insulation Board Adhesive

The 750ml Pro-Bond Foaming roofing adhesive has been designed to offer quick and economical installation of roof insulation boards on flat roofing projects.

Each can contains enough adhesive to adhere up to 14 m2 of insulation board (based on 19–25 mm beads at 300 mm centres), and comes with optional gun sizes: a standard short barrel foam gun and a 100 cm long barrel foam gun. The re-useable guns offer easy, quick yet controlled application and the adhesive is dispensed as foam which cures within 20 to 30 minutes. There’s no need to use a primer, and there are no fumes, noise, dust or vibration during use.

Pro-Bond Foaming roofing adhesive can be used for the attachment of insulation boards and fleece-backed single-ply membranes to a variety of substrates on flat roofs. Please refer to the manufacturers of adjacent layers to determine their compatibility, in terms of bonding, with Pro-Bond Foaming roofing adhesive.

Note that before installation, the suitability of the roof assembly to resist wind loading must be assessed in accordance with national requirements.

Features and benefits:

• Economical can size with minimal wastage.
• Quick and easy to apply with controlled application.
• Re-usable applicator guns in two sizes.
• Fast curing and strong bond strength.
• Short preparation time – no heating required.
• No primer needed.
• Safety: no hot works, naked flames, noise or vibration in use.
• Cleanliness: no fumes or dust in use.
• No damage to substrate from mechanical fixings.
• No visible fasteners on the underside of the substrate.
• Can be used on vertical substrates such as upstands.
• No thermal bridging.