NBS Source
PPG SigmaCover 2 Self-priming Epoxy Coating


  • Air spray.
  • Airless spray.
  • Brush.
  • Roller.

Steel surfaces should be mechanically cleaned. Concrete and cement bonded substrates must be hard, dry and free from laitance and contamination.

Please refer to the product Data Sheet for surface preparation, mixing and application instructions.


PPG SigmaCover 2 is a two pack Epoxy Paint that offers a fast drying solution and can be applied in low temperatures, down to freezing point.

PPG SigmaCover 2 is recommended for use in commercial, construction and industrial environments where chemical spillages, splashes and fumes from acids, alkalis, solvents and water can cause damage to surfaces. PPG SigmaCover 2 protects the surfaces of concrete and steel substrates against this attack.

Features and benefits:

  • Colour: Standard primer colours and custom colours.
  • Gloss Level: Semi-gloss.
  • High performance self priming universal epoxy.
  • High solids, low VOC.
  • Surface tolerant and abrasion resistant.
  • Compatible with prepared, damp surfaces.
  • Good adhesion on most existing coatings.

General information








Ss_15_30_17_16 Concrete protective coating systemsPrimary


M12/12 Resin flooring

M12/110 Resin flooring

Specification data - Concrete protective coating systems Enhanced data

Second coat

Not required.

Amercoat 68 Series.

Amercoat Epoxies.

Amerlock 2 / 400 Series.

Dimetcoat Series.

Show more

Top coat

Not required.

AmerShieldPSX 700.

Amercoat 450 Series.

Amercoat Epoxies.

SigmaCover Epoxies.

Show more