PPG SigmaCover 2 Self-priming Epoxy Coating
Verified by manufacturer 5 months ago
A 2 pack, fast drying, high solids, low temperatures epoxy coating for concrete and steel. LUL Cert 1329.
Application
- Air spray.
- Airless spray.
- Brush.
- Roller.
Steel surfaces should be mechanically cleaned. Concrete and cement bonded substrates must be hard, dry and free from laitance and contamination.
Please refer to the product Data Sheet for surface preparation, mixing and application instructions.
Description
PPG SigmaCover 2 is a two pack Epoxy Paint that offers a fast drying solution and can be applied in low temperatures, down to freezing point.
PPG SigmaCover 2 is recommended for use in commercial, construction and industrial environments where chemical spillages, splashes and fumes from acids, alkalis, solvents and water can cause damage to surfaces. PPG SigmaCover 2 protects the surfaces of concrete and steel substrates against this attack.
Features and benefits:
- Colour: Standard primer colours and custom colours.
- Gloss Level: Semi-gloss.
- High performance self priming universal epoxy.
- High solids, low VOC.
- Surface tolerant and abrasion resistant.
- Compatible with prepared, damp surfaces.
- Good adhesion on most existing coatings.
General information
Color | Other Guidance for specification option: Standard primer colours and custom colours. |
Finish | Semi-gloss |
Material | Epoxy |
Shape | Formless |
Uniclass | |
CAWS | M60/175 Protective coating M12/110 Resin flooring M12/12 Resin flooring |
Specification data - Concrete protective coating systems
Second coat | Not required. Amercoat 68 Series. Amercoat Epoxies. Amerlock 2 / 400 Series. Dimetcoat Series. |
Top coat | Not required. AmerShieldPSX 700. Amercoat 450 Series. Amercoat Epoxies. SigmaCover Epoxies. |
Colour | Guidance for specification option: Consult manufacturer and insert requirements. Available in standard primer colours and custom colours. |
Surface finish | Semi-gloss. |