Name: Parallel 84 Double Glazed Partition System
Brand: Radii
SKU: oyuhFLMT2yNj58KbMVWvTs

Color

Clear

Finish

Powder-coated

Anodized

Polished

Manufacturer guidance

Polyester Powder Coated RAL, Polished & Chemically brightened, Linish & Chemically brightened, Etch & Anodise -

Material

Aluminium

Glass

Manufacturer guidance

Aluminium (6063 T6) / Glass

Shape

Other

Length

Bespoke

Width

84 mm

Height

Bespoke

Warranty description

Manufacturer guidance

Dealt with on a project specific basis as part of the O&M process.

Uniclass

Pr_25_71_57_60 Partition panelsPrimary

CAWS

K30/10 Relocatable partition system

K30/130 Relocatable partition system

Unit size

Thickness

84 mm.

Partition height (nominal)

Manufacturer guidance

Insert requirements. For partitions over 3 m high, please consult with manufacturer.

Width (nominal)

Manufacturer guidance

Insert requirements. For panels over 1200 mm wide, please consult with manufacturer.

Deflection allowance (maximum)

Head

No deflection 25 mm deep x 50 mm wide aluminium channel.

Guidance for specification option:

Surface Mounted Deflection Head

±15 mm deflection 73 mm deep x 84 mm wide two part aluminium channel.

Guidance for specification option:

Surface Mounted Deflection Head

±25 mm deflection 83 mm deep x 84 mm wide two part aluminium channel.

Guidance for specification option:

Surface Mounted Deflection Head

±40 mm deflection 133 mm deep x 84 mm wide two part aluminium channel.

Guidance for specification option:

Surface Mounted Deflection Head

±15 mm deflection 15 mm visible aluminium channel.

Guidance for specification option:

Recessed Deflection Head – Co-ordination required with ceiling contractor.

±25 mm deflection 25 mm visible aluminium channel.

Guidance for specification option:

Recessed Deflection Head – Co-ordination required with ceiling contractor.

±40 mm deflection 40 mm visible aluminium channel.

Guidance for specification option:

Recessed Deflection Head – Co-ordination required with ceiling contractor.

Floor

Not applicable.

Manufacturer guidance

System does not offer deflection at floor level - consult with manufacturer for system weights.

Verticals

Manufacturer guidance

Lateral deflection available to suit design requirements - consult with manufacturer

Panel partition type

Double glazed system.

Framing, fixing points and joints

Floor detail: surface mounted aluminium U channel screw fixed.

Floor detail: 40 mm deep x 50 mm wide as standard.

Guidance for specification option:

– larger base details available.

Wall abutments: surface mounted aluminium U channel screw fixed into drylined partition.

Wall abutments: 40 mm deep x 50 mm wide as standard.

Guidance for specification option:

– larger abutment details available.

Corners: mitered panel to panel joint with 2 mm joint tape.

Solid panels

Type

18 mm MFC.

18 mm Aluminium Faced MDF.

19 mm Veneered MDF.

Manufacturer guidance

Solid Panels (to be installed into Tech Units).

Joint treatment

Type

2 mm dry joint tape between panels. 8 mm shadow-gap around panels.

Finish and colour

Clear – see above joint treatment.

Glazed panels

Type

Double-glazed, two 12.8 mm acoustic laminate glass

Guidance for specification option:

Additional manufacturer treatment options;

Annealed laminate.
Annealed acoustic laminate.
Toughened - heat soaked.
LCD switchable.
Low iron.

Consult manufacturer for details.

Manufacturer guidance

Double glazed (10-12.8 mm): Consult with manufacturer to ensure compliance with test/assessment data.

Integral blinds

Not suitable for slim double glazed systems.

Additional features

Tech panel to incorporate room booking systems and room controls.

Security post to incorporate access control devices.

Door arrangement

Door frames

25 mm x 40 mm rebated aluminium door frame.

Door panels

Type

GLIDE - 28 mm wide framed door with a continuous base threshold – 33 db Rw.

GLIDE - 28 mm wide framed door with a continuous base threshold – 34 db Rw.

GLIDE - 28 mm wide framed door with a continuous base threshold and bonded handle – 38 db Rw

Manufacturer guidance

Framed Glazed Sliding Door.

Vision panels

Not applicable.

Ceiling

Type

Consult with manufacturer for interface detail.

Panels

As Above.

Method of support

Timber fixing point required within the ceiling/bulkhead – to be supplied by others. Consult with ceiling manufacturer for support detail – co-ordination meeting with all parties concerned to be arranged prior to internal glazing installation.

Joint treatment

Secure fixing into timber provided above.

Perimeters, skirtings, sills

58 mm deep outer deflection profile as standard.

Trims

16 mm x 3 mm aluminium feature bands bonded to the faces 1, 2 & 4 on vertical glass joints with ?? horizontal bands.

16 mm x 5 mm aluminium feature bands bonded to the faces 1, 2 & 4 on vertical glass joints with ?? horizontal bands.

25 mm x 3 mm aluminium feature bands bonded to the faces 1, 2 & 4 on vertical glass joints with ?? horizontal bands.

25 mm x 5 mm aluminium feature bands bonded to the faces 1, 2 & 4 on vertical glass joints with ?? horizontal bands.

50 mm x 3 mm aluminium feature bands bonded to the faces 1, 2 & 4 on vertical glass joints with ?? horizontal bands.

50 mm x 5 mm aluminium feature bands bonded to the faces 1, 2 & 4 on vertical glass joints with ?? horizontal bands.

Hardware

Manufacturer guidance

See appropriate door specification for applicable ironmongery options.

Seals

Black perimeter compression seals.

Cable management and outlets

Double glazed/ boarded tech panel to incorporate room booking systems, access control and other electronics - refer to manufacturer with project specific requirements.

Other features

Tech panels.

Access control.

Locking.

Manufacturer guidance

Consult manufacturer for details.

Acoustic performance

45 dB Rw.

Manufacturer guidance

To comply to EN ISO 10140-2 and ISO 717-1: Acoustics vary according to framework/glazing.

Acoustic options subject to further design development, consult manufacturer.

Manifestation

Allowance of two rows 50 mm dots or square (minimum) Opal Frost.

Artwork and custom manifestation to client design.

Manufacturer guidance

In accordance with the requirements of Approved Document K.

StrengthGrade

0.36 kN/m.

Guidance for specification option:

Standard.

0.74 kN/m.

1.5 kN/m.

3.0 kN/m.

Manufacturer guidance

Consult with the manufacturer to ensure the system complies with current regulations

BS 5234:1992 Non-loadbearing screens not protecting a change in adjacent floor level of >380 mm

For glass load resistance criteria, see below;

- BS5234 not applied to “all glass partition screens”

- Nominal line load criteria of “short-term impact load” utilized

- 0.36kN/m applied as linear load at 1100 mm above FFL

- Glass deflection limited to L/65 or 25 mm, whichever is less under load

- Maximum deflection and stress in accordance with the glass performance requirements of EN572/EN12150/EN12543/EN14179 (where heat soaked)

- Building regulations Part N (BS6262 & BS EN 12600) + InsStucEng publication “structural use of glass in buildings”

- 0.36kN/m (default load)

- 0.74kN/m

- 1.5kN/m

BS 6180:2011 Barriers in and about buildings for Atria or protected change in adjacent floor level of >380 mm

Horizontal uniformly distributed line load 1100 mm above FFL (Glass deflection limited to L/65 or 25 mm, whichever is less relative to glass fixings)

Structural Glass based on line-load and attendant UDL + point load

- 0.74kN/m

- 1.5kN/m

- 3.0kN/m

Contains Red List materials

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Material

Aluminium

Glass

Manufacturer guidance

Aluminium (6063 T6) / Glass

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

Manufacturer guidance

EPD Available On Request.

Recyclability

100

Manufacturer guidance

Up to 100% Glass / 100% Aluminium.

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

70 %

Manufacturer guidance

17–28% for glass.

75% for aluminium.

Expected recycled content for Hydro 2.0.

Platform

Compatible

Version

Revit

IFC

Acoustic performance	45 dB Rw. Manufacturer guidance To comply to EN ISO 10140-2 and ISO 717-1: Acoustics vary according to framework/glazing. Acoustic options subject to further design development, consult manufacturer.
Manifestation	Allowance of two rows 50 mm dots or square (minimum) Opal Frost. Artwork and custom manifestation to client design. Manufacturer guidance In accordance with the requirements of Approved Document K.
StrengthGrade	0.36 kN/m. Guidance for specification option: Standard. 0.74 kN/m. 1.5 kN/m. 3.0 kN/m. Manufacturer guidance Consult with the manufacturer to ensure the system complies with current regulations BS 5234:1992 Non-loadbearing screens not protecting a change in adjacent floor level of >380 mm For glass load resistance criteria, see below; - BS5234 not applied to “all glass partition screens” - Nominal line load criteria of “short-term impact load” utilized - 0.36kN/m applied as linear load at 1100 mm above FFL - Glass deflection limited to L/65 or 25 mm, whichever is less under load - Maximum deflection and stress in accordance with the glass performance requirements of EN572/EN12150/EN12543/EN14179 (where heat soaked) - Building regulations Part N (BS6262 & BS EN 12600) + InsStucEng publication “structural use of glass in buildings” - 0.36kN/m (default load) - 0.74kN/m - 1.5kN/m BS 6180:2011 Barriers in and about buildings for Atria or protected change in adjacent floor level of >380 mm Horizontal uniformly distributed line load 1100 mm above FFL (Glass deflection limited to L/65 or 25 mm, whichever is less relative to glass fixings) Structural Glass based on line-load and attendant UDL + point load - 0.74kN/m - 1.5kN/m - 3.0kN/m

Parallel 84 Double Glazed Partition System

Application

Description

General information

Color

Finish

Manufacturer guidance

Material

Manufacturer guidance

Shape

Length

Width

Height

Warranty description

Manufacturer guidance

Uniclass

CAWS

Product range

Specification data - Partition panels

Unit size

Thickness

84 mm.

Partition height (nominal)

Manufacturer guidance

Width (nominal)

Manufacturer guidance

Deflection allowance (maximum)

Head

No deflection 25 mm deep x 50 mm wide aluminium channel.

±15 mm deflection 73 mm deep x 84 mm wide two part aluminium channel.

±25 mm deflection 83 mm deep x 84 mm wide two part aluminium channel.

±40 mm deflection 133 mm deep x 84 mm wide two part aluminium channel.

±15 mm deflection 15 mm visible aluminium channel.

±25 mm deflection 25 mm visible aluminium channel.

±40 mm deflection 40 mm visible aluminium channel.

Floor

Not applicable.

Manufacturer guidance

Verticals

Manufacturer guidance

Panel partition type

Double glazed system.

Framing, fixing points and joints

Floor detail: surface mounted aluminium U channel screw fixed.

Floor detail: 40 mm deep x 50 mm wide as standard.

Wall abutments: surface mounted aluminium U channel screw fixed into drylined partition.

Wall abutments: 40 mm deep x 50 mm wide as standard.

Corners: mitered panel to panel joint with 2 mm joint tape.

Solid panels

Type

18 mm MFC.

18 mm Aluminium Faced MDF.

19 mm Veneered MDF.

Manufacturer guidance

Joint treatment

Type

2 mm dry joint tape between panels. 8 mm shadow-gap around panels.

Finish and colour

Clear – see above joint treatment.

Glazed panels

Type

Double-glazed, two 12.8 mm acoustic laminate glass

Manufacturer guidance

Integral blinds

Not suitable for slim double glazed systems.

Additional features

Tech panel to incorporate room booking systems and room controls.

Security post to incorporate access control devices.

Door arrangement

Door frames

25 mm x 40 mm rebated aluminium door frame.

Door panels

Type

GLIDE - 28 mm wide framed door with a continuous base threshold – 33 db Rw.

GLIDE - 28 mm wide framed door with a continuous base threshold – 34 db Rw.

GLIDE - 28 mm wide framed door with a continuous base threshold and bonded handle – 38 db Rw

Manufacturer guidance

Vision panels

Not applicable.

Ceiling