NBS Source
List your products
Description

A curved stainless steel slatted seat with a straight section, a curved backrest and tubular frame.

Features:

  • Manufactured from 316L grade, satin polished stainless steel.
  • The seating slats standard gauge of steel is 30 mm wide x 5 mm thick. Each slat is wrapped around the top and lower supporting tubes and welded at three points of contact.
  • The legs and frame are manufactured from a heavy gauge stainless steel tube 60.3 mm diameter and 3 mm wall thickness. Legs are continuous pieces, fully welded to the frame.
  • The seat features engraved discs, fully welded to the end of the frame tubes.
  • Part of the Ollerton M3 range of seats, benches, tables and litter bins.

General information
Features

Manufactured from 316L grade, satin polished stainless steel

The seating slats standard gauge of steel is 30 mm wide x 5 mm thick. Each slat is wrapped around the top and lower supporting tubes and welded at three points of contact

The legs and frame are manufactured from a heavy gauge stainless steel tube 60.3 mm diameter and 3 mm wall thickness. Legs are continuous pieces, fully welded to the frame

The seat features engraved discs, fully welded to the end of the frame tubes

Part of the Ollerton M3 range of seats, benches, tables and litter bins

Uniclass 2015
Pr_40_50_12_33 Garden benchesPrimary
CAWS

Q50/225 Seats

Q50/30 Street furniture

Specification data - Garden benches
Product Reference

OLSS411, Ollerton M3 Hockey Stick Seat with Stainless Steel Slats

Seat Span

3214 mm, inward facing

Standard.

___ mm, inward facing

Optional.

4028 mm, outward facing

Standard

___ mm, outward facing

Optional.

Fixing

Free standing

Spigot mounted

Sub-surface mounted

Surface mounted

Accessories

Not required

Two arm rests

___ arm rests

Demountable ground socket

Engraved motif as drawing ___

Plaques as drawing ___

Preventative bar

Surface trim plates

Standard product features

Seat span:

  • Standard spans: 3214 mm (inward facing) or 4028 mm (outward facing).
  • Straight section: 1800 mm.
  • Any optional length can be supplied.

Internal radius:

  • 900 mm.

Seat depth:

  • 535 mm.

Height to front edge:

  • 480 mm.

Height to top of backrest:

  • 820 mm.

Weight:

  • 140 kg (standard lengths).

Product Options

Fixing:

- Free standing:

  • Designed to be lifted in place.

- Spigot mounted:

  • The seat legs are designed to be situated directly into concrete.

- Sub-surface mounting:

  • Similar to surface mounting, however seat legs are bolted to a concrete substrate and then a surface material, such as paving, is laid on top.
  • The seat legs are extended to ensure the same seat height above ground as surface mounting.

- Surface mounting (base plate):

  • A positive bolting system should be selected by the installer based on the type and condition of the substrate, taking into account any applicable close edges and thicknesses.

Accessories:

  • Arm rests: Can be provided at any position.
  • Preventative bar: Designed to stop people sitting on the back of the seat backrest - contact Marshalls Street Furniture for further details.

Similar products from Marshalls plc