Novara-25 Fencing

Description

The anti-climb properties and security level of the Novara-25 fence makes it particularly appropriate for schools and colleges; the tight aperture complies with NHBC guidelines and the narrow post centres provide exceptional rigidity.

Mesh size: 25 x 76 mm, vertical flat bars 25 x 2 mm, horizontal round bars: 4 mm diameter.

Single leaf, double leaf, pivot, cantilevered or sliding gates are made to match with Novara-25 infill panels. Optional entry/ exit controls can be supplied for restricted access with automatic activation in the event of fire alarm.

Grating fences are supplied in accordance with BS 1722-14.

Panels and posts can be supplied galvanized only or galvanized and powder coated to any RAL colour.

General information

Finish

Hot dip galvanized

To BS EN ISO 1461.

Hot dip galvanized and polyester powder coated

Insert requirements. To BS EN ISO 1461 and polyester powder coated to BS 1722–16 in any RAL or BS colour.

Material

Electrofused steel S235JR

Uniclass 2015

Ss_25_14_67_51 Metal mesh panel fencing systemsPrimary

CAWS

Q40/125 Open mesh steel panel general purpose fencing

Q40/126 Open mesh steel panel security fencing

Q40/27 Open mesh steel panel fencing

Q40/30 Proprietary fencing

Q40/430 Proprietary fencing

Specification data - Metal mesh panel fencing systems

Product Reference

Novara-25 Fencing

Height

1000 mm

1200 mm

1500 mm

1800 mm

2000 mm

2400 mm

2700 mm

3000 mm

Width

1270 mm

Posts

-

Straight section

50 x 30 mm RHS

For panel heights: 1000, 1200 or 1500 mm.

60 x 40 mm RHS

For panel height: 1800 mm.

80 x 40 mm RHS

For panel heights: 2000, 2400 or 2700 mm.

100 x 50 mm RHS

For panel height: 3000 mm.

60 x 7 mm flat bar

For panel heights: 1000, 1200, 1500 or 1800 mm.

80 x 8 mm flat bar

For panel heights: 2000 or 2400 mm.

100 x 55 mm I-post

For panel heights: For panel heights: 2000, 2400, 2700 or 3000 mm

Corners

60 x 60 mm RSA

For panel heights: 1000, 1200, 1500 or 1800 mm.

80 x 80 mm RSA

For panel heights: 2000, 2400 or 2700 mm.

100 x 100 mm RSA

For panel height: 3000 mm.

60 x 60 mm SHS

For panel heights: 1000, 1200, 1500 or 1800 mm.

80 x 80 mm SHS

For panel heights: 2000, 2400 or 2700 mm.

100 x 100 mm SHS

For panel height: 3000 mm.

Two flat bar posts

For corners that are not 90 degrees.

Fixing

For anchoring within wall pockets

For ground fixing

Off-set over top of wall

T-posts

With base plates for fixing to a concrete foundation

Finish

Hot dip galvanized

To BS EN ISO 1461.

Hot dip galvanized and polyester powder coated

Insert requirements. To BS EN ISO 1461 and polyester powder coated to BS 1722–16 in any RAL or BS colour.

Other requirements

None

Curved top

Decorative rails

Handrails and feature posts with optional finials in steel

Handrails and feature posts with optional finials in wood

Ornamental motifs and laser cut panels

Radiused panels

Waved top

Standard product features

Material:

Electrofused steel S235JR.

Panel width:

1270 mm (achieves a nominal width of 1310 mm when framed and fixed with an RHS post).

Fixing:

The panels are framed top and bottom with flat bars. This framing bar is bent over at the ends to form fixing lugs for a bolted panel-to post-connection. Fence heights of 2000 mm and above have an additional intermediate fixing.

Orientation:

Fences are designed with the round bars set to the inside of the enclosed area.

Installation:

  • Fastenings: Panels fixed to posts with M10 x 70 mm stainless steel bolts with domed heads and snap-off security nuts, all stainless steel grade A2.
  • Groundwork: Refer to BS 1722 giving consideration to existing ground conditions. Posts to be set in holes 300 to 400 mm square in plan and between 550 and 700 mm in depth, depending on fence height. Holes should be completely filled to a minimum of 50 mm below ground level with concrete mix (minimum strength of C20).
  • Height from ground: Panels to sit 100 mm (maximum) off the ground.
  • Changes in level: Fence panels stepped to 150 mm (maximum) on standard length post. Post centres to be reduced for steeper gradients (between 1:20 and 1:7).
  • Changes in direction: 60 x 60, 80 x 80 or 100 x 100 mm SHS or RSA for 90 degree corner post. Two flat bar posts for other angles.

Product Options

Posts:

Alternative lengths and style of post:

  • For ground fixing.
  • With base plates for fixing to a concrete foundation.
  • Off-set over top of wall.
  • For anchoring within wall pockets.
  • T-posts can be used to reduce the gap between panel and post for increased security.

Special panel widths:

Non-standard widths available upon request following site survey or cut on site and fixed to posts with Lang+Fulton adjustable lug.

Finishing:

Polyester powder coating is a multi-stage process which applies thermo-setting resins producing a superior finish to painting.

Other requirements:

- Bespoke designs:

The integrity of the grating material allows it to be cut, shaped or rolled to create customised fencing:

  • Curved or waved top.
  • Radiused panels.
  • Incorporate ornamental motifs and laser cut panels.

Alternative designs include:

  • Decorative rails.
  • Handrails and feature posts with optional finials in steel or wood.

Literature

Similar products from Lang+Fulton