NBS Source
Norcros Wall Tile Grout

Application

Suitable for use on ceramic, stone, vitrified tile and mosaic wall and floor tiles. The material is also suitable for use in pools.

Description

Wall Tile Grout is a fine, water and weather resistant grouting material for internal and external tile joints up to 3 mm wide, in ceramic, stone, vitrified tile and mosaic wall and floor tiles. The material is also suitable for use in pools.


Features and benefits:

  • The performance of Wall Tile Grout can be improved with the addition of Norcros Adiflex where reduced water permeability is a requirement.
  • The grout is water resistant but not impervious to the passage of water. In areas of potential water ingress, preparation of the surface with Norcross Water Seal should be considered. Where an impervious joint is required Norcros Super Epoxy Grout should be used.
  • Conforms to classification BS EN 13888 CG1.

General information

Uniclass 2015

Pr_20_31_53_64 Polyester resin groutsPrimary

CAWS

M40/10 Natural stone covering to

M40/110 Tiling to

M40/115 Natural stone covering to

M40/120 Mosaic to

M40/5 Tiling to

Specification data - Polyester resin grouts Enhanced data

Standard

To BS EN 13888 CG1.

Working time

2 hours.

at 20°C.

Coverage

1kg will fill joints of approximately 4m² of 150mm x 150mm x 6mm tiles with 2mm wide joints or 1.5m² of 20mm x 20mm x 4mm mosaics with 2mm spacing.

Similar products from Norcros Adhesives, trading division of Norcros Group (Holdings)

Norcros Wall and Floor Tile Grout

Norcros Wall and Floor Tile Grout

Stop Mould Flexible Wall Grout

Stop Mould Flexible Wall Grout