Nitoseal MS600

Description

One part medium modulus sealant based on hybrid silyl modified polyether technology. It is suitable for sealing movement joints of 5–35 mm wide in buildings and civil engineering structures, including joints that will be subject to intermittent or permanent immersion.

Features:

  • Accommodates continuous and pronounced cyclic movement.
  • Can be applied to damp substrates.
  • Cures to a tough, elastic rubber seal.
  • Easy to apply at low temperature.
  • Excellent resistance to dilute acids and alkalis.
  • Excellent water resistance.
  • Fast rate of cure.
  • Isocyanate free.
  • Resistant to aerobic and anaerobic bacteriological attack.

General information

Features

Accommodates continuous and pronounced cyclic movement

Can be applied to damp substrates

Cures to a tough, elastic rubber seal

Easy to apply at low temperature

Excellent resistance to dilute acids and alkalis

Show more

Uniclass 2015

Pr_30_31_76_16 Construction joint sealantsPrimary

CAWS

E40/530 Sealant

Specification data - Construction joint sealants

Product Reference

Nitoseal MS600

Primer

Fosroc Primer MS2

Standard product features

Colour:

Grey.

Technical properties:

  • Application temperature: 5–50°C.
  • Movement accommodation factor: 25% (butt joints), 50% (lap joints).
  • Skinning time (20°C): 30 minutes.
  • Speed of cure (20°C): 3 mm (24 hours), 6 mm (48 hours), 8 mm (72 hours).

Literature

Technical data sheet catalogue

Technical data sheet catalogue

Fosroc Sealants Brochure 2011

Fosroc Sealants Brochure 2011

Similar products from Fosroc International Limited

Flamex One

Flamex One

Flamex Two

Flamex Two

Nitoseal MS100

Nitoseal MS100

Nitoseal MS300

Nitoseal MS300

Nitoseal MS60

Nitoseal MS60

Nitoseal PU888