Nitomortar FC

Nitomortar FC is designed for filling blow-holes, and eliminating minor irregularities prior to the application of Nitocote and Nitoflor epoxy coatings. It can be applied to damp substrates and quickly cures to form a completely impermeable surface ready for overcoating.

Notmortar FC can be applied up to 5mm thickness on vertical and overhead locations in a single application without the use of formwork. Greater thicknesses can be achieved by application of subsequent layers.

Features/ Benefits:

  • Non-slump, can be applied to vertical surfaces and trowelled into blow-holes.
  • Superior bond strength to virtually all substrates.
  • Smooth paste consistency is easy to apply and finish.
  • Reduced usage of subsequent coating.
  • Pre-weighed components ensure consistency.

General information

Uniclass 2015

Pr_20_31_53_15 Concrete repair mortarsPrimary


C42/320 Levelling/ smoothing coats

Specification data - Concrete repair mortars

Product Reference

Nitomortar FC

Standard product features

Technical properties:

  • Compressive strength (to BS 6319-2): 70 N/mm² (7 days).
  • Fresh wet density: 1700 kg/m³ (approximate).
  • Cure time (20°C): 10 hours (initial cure), 10-24 hours (over-coating time), 7 days (full cure).

Similar products from Fosroc International Limited