NBS Source
I'm a manufacturer
Compare variants

Newton Newtonite - Non-Meshed Damp Proofing Membrane

Verified by manufacturer 3 months ago

Newtonite 803 Membrane (M19)

Newton Waterproofing Systems Variant:

Non-meshed High density polyethylene (HDPE) damp proofing membrane (DPM) material.

Jump to:
+44 (0)1732 360095 Website

Application

High density polyethylene (HDPE) material used as a damp-proof membrane (DPM) to isolate the wall finish from the damp wall where a meshed surface for plaster or render is not required.


Newton Newtonite (Non-Meshed) is available in rolls of 2m x 20m = 40m².


Newton Newtonite is typically used where the wall finish to the damp-proof membrane is timber battens, a dry-lining frame or block wall. Newton Newtonite is 0.5 mm thick and has a pattern of raised 3 mm studs. The studs face the wall and create air channels that allow for vapour equalisation to take place between the membrane and the wall.


Newton Newtonite is light, clean and easy to handle. It can be cut with a sharp knife, scissors or shears. The membrane is inert and is highly resistant to water, alkalies, saline solutions and organic acids, and it is not affected by minerals. It is also resistant to bacteria, fungi and other small organisms.


  • Newton Newtonite is guaranteed against deterioration for 30 years, and has a life expectancy of at least 50 years (DIN 9001:2000).

Description

High-quality damp proof membrane (DPM) for use above ground as an alternative to Newtonite Lath Mesh Membrane where a meshed surface is not required as a surface for direct plastering or rendering – typically where the wall finish to the damp proof membrane is timber battens, a dry-lining frame or block wall.


Features and benefits:

  • High density polyethylene (HDPE) damp proofing material.
  • Isolation of wall finish from the damp wall.
  • Does not require extensive and damaging preparation to the wall surface.
  • Speed of installation.
  • Resistant to efflorescing salts and hydrocarbon contamination.
  • Rot-proof.
  • Shallow stud profile for where space is at a premium.

General information

Color

White

Manufacturer guidance

White/translucent.

Finish

Smooth

Guidance for specification option:

Dimpled mesh, studded finish

Material

High density polyethylene (HDPE)

Guidance for specification option:

Non-Meshed Damp Proofing Membrane.

Shape

Other

Guidance for specification option:

Membrane form.

Length

10000 mm

20000 mm

Width

1000 mm

2000 mm

Height

3500 mm

Warranty description

30 year

Guidance for specification option:

Newton 803 and 803 Mesh are supplied with a product warranty of 30 years and have a life expectancy of at least 50 years (DIN 9001:2000)

Uniclass

Pr_25_57_51_36 High-density polyethylene (PE-HD) studded sheetsPrimary

CAWS

J40/290 High-density polyethylene/ polypropylene studded cavity drain membrane

J40/47 High-density polyethylene/ polypropylene studded cavity drain membrane

Product range

Damp Proofing Systems

Specification data - High-density polyethylene (PE-HD) studded sheets

Standard

To EN 12667, BS EN 13501-1, EN 14030 and EN ISO 13438.

Third-party certification

BBA certificate 94/3010.

Stud height

2.9 mm.

Sheet thickness

0.6 mm.

Weight (minimum)

23 kg.

Colour

White/ translucent.

Performance characteristics

-

UV resistance

Not UV stable.

Fire performance

To BS EN 13501-1: Euroclass E.

Density

500 g/m².

Area

10 m².

Vicat softening temperature

126°C.

Service temperature

-40°C to +80°C.

Compressive strength - Temporary loading

>320 kPa.

Compressive strength - Permanent loading

100 kPa.

ThermalConductivity

0.461 W/m·K.

Water vapour diffusion resistance – Sd value

>604 m.

Water vapour diffusion resistance – µ value

>1 208 000 µ.

Water vapour diffusion resistance

>3020 MNs/g.

Chemical resistance – Excellent

100%.

Oxidation resistance – Excellent

100%.

Fixing

Newton MultiPlug (A1).

Joint seal/ repairs

Newton Overtape.

Dimensions

1000 x 10,000 mm.

Guidance for specification option:

(w x l)

Sustainability data

Contains Red List materials

No

Country of product manufacture

Germany

Material

High density polyethylene (HDPE)

Guidance for specification option:

Non-Meshed Damp Proofing Membrane.

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

100 %

Literature

Newton Newtonite TDS

Newton Newtonite TDS

Case studies

Damp Proofing, Brighton

Damp Proofing, Brighton

Similar products from Newton Waterproofing Systems

Drainage and Water-Retention Green Roof Membrane Newton 420 Reservoir - Extensive Green Roof Drainage Membrane

Drainage and Water-Retention Green Roof Membrane Newton 420 Reservoir - Extensive Green Roof Drainage Membrane

Drainage Membrane Newton NewSeal 408 DeckDrain for Decks & Flat Roofs - Drainage Membrane for Decks & Flat Roofs

Drainage Membrane Newton NewSeal 408 DeckDrain for Decks & Flat Roofs - Drainage Membrane for Decks & Flat Roofs

Externally Applied Drainage Membrane Newton HydroBond 410 GeoDrain - Externally Applied Drainage Membrane

Externally Applied Drainage Membrane Newton HydroBond 410 GeoDrain - Externally Applied Drainage Membrane

Flat Loose Laid Flooring Membrane Newton DampSafe 601 Slimline - Flat High Grade Flooring Membrane

Flat Loose Laid Flooring Membrane Newton DampSafe 601 Slimline - Flat High Grade Flooring Membrane

Loose Laid 3mm Flooring Membrane Newton DampSafe 603 for New and Existing Floors - Loose Laid Floor Membrane

Loose Laid 3mm Flooring Membrane Newton DampSafe 603 for New and Existing Floors - Loose Laid Floor Membrane

Newton CDM 503 - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 3 mm Cavity Drain Membrane for Basements

Newton CDM 503 - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 3 mm Cavity Drain Membrane for Basements

Newton CDM 508 - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 8 mm Cavity Drain Membrane for Basements

Newton CDM 508 - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 8 mm Cavity Drain Membrane for Basements

Newton CDM 508 eco Floor - 8mm Recycled Type C Cavity Drain Floor Membrane - 8 mm Recycled Cavity Drain Membrane

Newton CDM 508 eco Floor - 8mm Recycled Type C Cavity Drain Floor Membrane - 8 mm Recycled Cavity Drain Membrane

Newton CDM 508R - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 8 mm Cavity Drain Membrane for Basements

Newton CDM 508R - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 8 mm Cavity Drain Membrane for Basements

Newton CDM 520 eco Floor - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 20mm Recycled Cavity Drain Membrane

Newton CDM 520 eco Floor - Basement Waterproofing Membrane for Waterproofing of Existing and New Build Basements - 20mm Recycled Cavity Drain Membrane