NBS Source
Newton Newtonite 803 Membrane Non-Meshed Damp Proofing Membrane
Compare variants

Newton Newtonite 803 Membrane Non-Meshed Damp Proofing Membrane

Newtonite 803 Membrane (M19)

Newton Waterproofing Systems Variant:
Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Non-meshed damp proofing membrane.

Jump to:
+44 (0)1732 360095 www.newtonwaterproofing.co.uk

Application

As a damp-proof membrane to isolate the wall finish from the damp wall where a meshed surface for plaster or render is not required.


As a damp-proof membrane to isolate the wall finish from the damp wall where a meshed surface for plaster or render is not required.


Newtonite 803 Membrane (Non-Meshed) is available in rolls 1m x 10m = 10m2 (M19) and 2m x 20m = 40m2 (M20)

Newtonite 803 is typically used where the wall finish to the damp-proof membrane is timber battens, a dry-lining frame or block wall. Newtonite 803 is 0.5mm thick and has a pattern of raised 3mm studs. The studs face the wall and create air channels that allow for vapour equalisation to take place between the membrane and the wall.


Newtonite 803 is light, clean and easy to handle. It can be cut with a sharp knife, scissors or shears. The membrane is inert and is highly resistant to water, alkalies, saline solutions and organic acids, and it is not affected by minerals. It is also resistant to bacteria, fungi and other small organisms.


Newtonite 803 is guaranteed against deterioration for 30 years, and has a life expectancy of at least 50 years (DIN 9001:2000) and is supported by BBA Certification Number 94/3010.

Description

BBA certified, high-quality damp proof membrane for use above ground as an alternative to Newtonite 803 Mesh Membrane or NewLath 805 Mesh Membrane where a meshed surface is not required as a surface for direct plastering or rendering – typically where the wall finish to the damp proof membrane is timber battens, a dry-lining frame or block wall.


Features and benefits:

  • Isolation of wall finish from the damp wall.
  • Does not require extensive and damaging preparation to the wall surface.
  • Speed of installation.
  • Resistant to efflorescing salts and hydrocarbon contamination.
  • Rot-proof.
  • Shallow stud profile for where space is at a premium.

General information

Color

White/translucent.

White

Finish

Smooth

Dimpled mesh, studded finish

Material

High density polyethylene (HDPE)

Non-Meshed Damp Proofing Membrane.

Shape

Other

Membrane form.

Length

10000 mm

20000 mm

Width

1000 mm

2000 mm

Height

3500 mm

WarrantyDescription

30 year

Newton 803 and 803 Mesh are supplied with a product warranty of 30 years and have a life expectancy of at least 50 years (DIN 9001:2000)

Uniclass

Pr_25_57_51_74 Rubber studded sheetsPrimary

CAWS

J40/290 High-density polyethylene/ polypropylene studded cavity drain membrane

J40/47 High-density polyethylene/ polypropylene studded cavity drain membrane

Product range

Damp Proofing Systems

Specification data - Rubber studded sheets Enhanced data

Standard

To EN 12667, BS EN 13501-1, EN 14030 and EN ISO 13438.

Material

-

Studded layer

High-density polyethylene (HDPE).

Stud height

2.9 mm.

Sheet thickness

0.6 mm.

Weight (minimum)

23 kg.

Colour

White/ translucent.

Performance characteristics

-

UV resistance

Not UV stable.

Fire performance

To BS EN 13501-1: Euroclass E.

Material

High density polyethylene (HDPE)

Non-Meshed Damp Proofing Membrane.

Density

500 g/m².

Area

10 m².

Height

3.5 mm.

Vicat softening temperature

126°C.

Packaged weight

23.0 kg.

Service temperature

-40°C to +80°C.

Compressive strength - Temporary loading

>320 kPa.

Compressive strength - Permanent loading

100 kPa.

ThermalConductivity

0.461 W/mK.

Water vapour diffusion resistance – Sd value

>604 m.

Water vapour diffusion resistance – µ value

>1 208 000 µ.

Water vapour diffusion resistance

>3020 MNs/g.

Resistance to fire

Euroclass E.

Chemical resistance – Excellent

100%.

Oxidation resistance – Excellent

100%.

Fixing

Newton MultiPlug (A1).

Thickness

0.6 mm.

Joint seal/ repairs

Newton Overtape.

Dimensions

1000 x 10000 mm.

(w x l)

Environmental information

Recyclability

100%

Recycled content

100 %

Literature

Newtonite 803 Membrane (Non-Meshed) Data Sheet

Newtonite 803 Membrane (Non-Meshed) Data Sheet

Case studies

Damp Proofing, Brighton

Damp Proofing, Brighton

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

British Board of Agrément (BBA) - certficate

Similar products from Newton Waterproofing Systems

DampSafe 601 Slimline - Flat Loose Laid High Grade Flooring Membrane

DampSafe 601 Slimline - Flat Loose Laid High Grade Flooring Membrane

Newton CDM 503 Membrane - 3mm Cavity Drain Membrane for Basements

Newton CDM 503 Membrane - 3mm Cavity Drain Membrane for Basements

Newton CDM 508 Membrane - 8mm Cavity Drain Membrane for Basements

Newton CDM 508 Membrane - 8mm Cavity Drain Membrane for Basements

Newton CDM 520 eco Floor - 20mm Recycled Cavity Drain Floor Membrane

Newton CDM 520 eco Floor - 20mm Recycled Cavity Drain Floor Membrane

Newton CDM Condensation Strip - To Collect Condensation

Newton CDM Condensation Strip - To Collect Condensation

Newton CDM System – Cavity Drain Waterproofing for Below-Ground Structures

Newton CDM System – Cavity Drain Waterproofing for Below-Ground Structures

Newton DampSafe 603 - Loose Laid Floor Membrane

Newton DampSafe 603 - Loose Laid Floor Membrane

Newton HydroBond 410 GeoDrain - Externally Applied Drainage Membrane

Newton HydroBond 410 GeoDrain - Externally Applied Drainage Membrane

Newton NewLath 805 - Meshed Damp Proofing Membrane

Newton NewLath 805 - Meshed Damp Proofing Membrane

Newton Newtonite 803 Mesh Membrane - 3mm Meshed Damp Proofing Membrane

Newton Newtonite 803 Mesh Membrane - 3mm Meshed Damp Proofing Membrane