NBS Source
I'm a manufacturer

Newton CDM Fibran XPS-500C for Basement Waterproofing Systems - Closed-cell Slotted Insulation Board

Verified by manufacturer 4 months ago

Newton Waterproofing Systems Third party certifications:
  • DoP

    DoP

    Certificate type

  • EPD

    EPD

    Certificate type

Newton CDM Fibran XPS-500C is a 50mm deep, closed-cell thermal insulation board made from rigid extruded polystyrene foam (XPS). XPS-500C is also manufactured in accordance with EN 13164.

Jump to:
+44 (0)1732 360095 Website

Application

CDM Fibran XPS-500C can be installed in the following areas:


  • As the spacer below cavity drain waterproofing flooring membranes;
  • Protection of externally applied Type A waterproofing;

Insulated support below HydroBond 403 Plus

  • waterproofing membrane
  • Parking decks and green roofs
  • Insulating of subterranean structures sited permanently within the water table

Description

CDM Fibran XPS-500C boards are used to form a 50 mm insulated spacer adjacent to the Basedrain and Floordrain drainage channels within the cavity drain waterproofing system, where it remains dimensionally stable even when fully immersed.


The insulation boards have a heat-hardened surface to increase point load capability below-studded membranes and feature specifically designed slots to the underside of the boards, that in combination with the perimeter and spine drainage channels of cavity drain waterproofing form a fully drained supporting spacer below the floor drainage membrane.


The insulation boards can also be used as a protection for liquid waterproofing membranes applied externally to new earth-retained structures or retained walls, providing protection, insulation and drainage within one product.


Features and benefits:

  • Third-party tested to confirm the load capability for use below Newton studded, cavity drain membranes.
  • Excellent thermal insulation characteristics, with a very low coefficient of thermal conductivity.
  • Closed cell structure with no connecting capillaries resulting in high resistance to water absorption and diffusion of water vapour.
  • Capable of permanent submersion in water.
  • Fully inert when subjected to climatic variations.
  • High mechanical and compressive strength and high dimensional stability.
  • Does not contain CFCs, HCFCs, PBDEs, PFOA or PFCs.
  • Easy to transport, cut and apply.
  • 100% recyclable.
  • Completely rot-proof and does not develop any mould or other efflorescence.
  • No nutritional value for rodents, insects, etc.
  • Good resistance to acids, alkalines, aggressive ground containments and inorganic gases.
  • Suitable substrates include compacted, clean, level surfaces, basement concrete floor slabs and rafts, earth-retained walls of concrete, mortar or insulating concrete forms (ICF) and compacted blinding.
  • CE marked.
  • Life expectancy is equivalent to the building in which it is installed (estimated at 50 years).

General information

Color

Green

Finish

Smooth

Material

High density extruded polystyrene (XPS)

Manufacturer guidance

XPS

Shape

Other

Length

1000 mm

Width

600 mm

Height

50 mm

Uniclass

Pr_25_71_63_29 Extruded polystyrene (XPS) boardsPrimary

CAWS

J40/290 High-density polyethylene/ polypropylene studded cavity drain membrane

J40/380 Protection boards for damp-proofing/ tanking

J40/70 Protection boards for damp-proofing/ tanking

Product range

CDM System - Type C Internal Cavity Drain Waterproofing

Specification data - Extruded polystyrene (XPS) boards

Third party product certification

-

Manufacturer guidance

Third-party tested to confirm the load capability for use below Newton studded, cavity drain membranes.

Fire performance

Class E.

Compressive strength (minimum) at 10% compression

500 kPa.

Thermal conductivity (maximum)

0.040 W/mk.

Thickness

50 mm.

Face size (length x width)

1000 x 600 mm.

Edges

Square.

Accessories/ Other requirements

Not required.

Newton Insulation Fixings (IF90).

Form

Rigid board with a slotted surface and square edges.

Sustainability data

Contains Red List materials

No

Country of material origin

Germany

Country of product manufacture

Germany

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

7.5 kg CO₂ eq/m²

Recyclability

100%

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

Third party certifications

Third party certifications

DoP

DoP

CDM Fibran XPS-500C DoP

EPD

EPD

CDM Fibran XPS 500-C Environmental Product Declaration (EPD)

Literature

Newton CDM Fibran XPS-500C TDS

Newton CDM Fibran XPS-500C TDS

Case studies

Listed Vault Waterproofing in Central London

Listed Vault Waterproofing in Central London

Basement Extension to a Grade 2 Listed Building, London

Basement Extension to a Grade 2 Listed Building, London