NBS Source
List your products
NedZink Shingles
Application

  • Designed for covering of large and small inclined and vertical surfaces.
  • Can be used on ventilated and damp proof facades.
  • The minimum pitch of the roof is 25° or 18° when the vertex of the shingle is soldered.

Description

Aesthetically pleasing shingles are a versatile cladding solution. Available as square, rectangular, triangular, diamond and rhomboid shapes in a range of different sizes.

NedZink produces titanium zinc in accordance with EN 988, an alloy based on electrolytically refined zinc with a minimum purity of 99.995% Zn (Z1 in accordance with EN 1179) with small additions of the alloy elements copper, titanium and aluminium.

Roofing or facade cladding in NedZink titanium zinc protects a building for up to 70 or even 150 years. An environmental product declaration with ECO platform label for NedZink NATUREL, NedZink NEO and NedZink NOIR are available, consult literature for details.

Profiles:

The dimensions of the eaves profiles, attachment profiles etc. will depend on the on-site dimensions and can either be made by the sheet metal worker or supplied custom-made in lengths as custom items.

Application:

  • Designed for covering of large and small inclined and vertical surfaces.
  • Can be used on ventilated and damp proof facades.
  • The minimum pitch of the roof is 25° or 18° when the vertex of the shingle is soldered.

- Substructure:

  • The product must be fully supported by timber, preferably of rough, unplaned boards, 23-25 mm thick and not tongue and grooved, with gaps of at least 5 mm.
  • Use galvanized nails with a zinc-layer thickness of at least 20 µm or AISI 1.4301 (304 grade) stainless steel for fastening.

Suitable substructure materials:

  • Ventilated 18 mm-thick weather and boil proof (WPB) plywood.
  • Ventilated oriented strand board OSB3.
  • Hard metal board.
  • Composite panel.
  • Rigid insulation.
  • Metal trapezoidal deck (cladding only).

Underlay:

ISO-Mat Pro®.

Fixing clips:

SM-ELH-27.

General information

Material

NedZink NATUREL

NedZink NEO

NedZink NOIR

NedZink NUANCE Blue

NedZink NUANCE Green

NedZink NUANCE Red

Special order

See 'Options' below and insert requirements.

Uniclass 2015

Pr_25_71_51_99 Zinc standard temper alloy stripsPrimary

CAWS

H74/130 Cladding

Specification data - Zinc standard temper alloy strips

Product Reference

NedZink Shingles

Design

Diamond

Flatlock

Large format rectangle.

Rectangular

Rhomboid

Square

Triangular

Bespoke

On request; consult manufacturer for details and insert requirements.

Material

NedZink NATUREL

NedZink NEO

NedZink NOIR

NedZink NUANCE Blue

NedZink NUANCE Green

NedZink NUANCE Red

Special order

See 'Options' below and insert requirements.

Thickness

0.7 mm

0.8 mm

Ancillaries

None

Bespoke profile

Consult manufacturer for details and insert requirements.

Standard product features

Sliding clip, 70 x 50 mm:

  • Material thickness as for the shingle.
  • The sliding clip functions as a support clip.

Soldered clips:

  • Width: 50 mm.
  • Length: 100 mm (approximately), depending on the location and space for fitting on the base.

Technical characteristics of base material:

  • Yield strength elasticity (Rp 0,2): 110 N/mm² (minimum).
  • Tensile strength (Rm): 150 N/mm2² (minimum).
  • Elongation (A50): 40%(minimum).
  • Vickers hardness (HV3): 40 (minimum).
  • Folding test: No fractures on the fold, no cracks, relative tensile strength D >0.7 x original tensile strength.
  • Permanent stretch in creep test: 0.1% (maximum)
  • Edgewise bow: 1.5 mm/m (maximum).
  • Flatness-corrugation: 2 mm (maximum).
  • Density: 7.2 g/cm³.
  • Melting point: 420°C.
  • Recrystallisation temperature: >300°C.
  • Linear expansion coefficient: 0.022 mm/m·K.

Product Options

Material:

Special order: NedZink NOVA and Pro-Tec options are available; consult manufacturer for details.

Literature
Similar products from Metal Solutions Limited