Natural Smoke Shaft System

A system to provide smoke and heat extract ventilation in accordance with BS 7346-4 and to comply with Building Regulations. Suitable for commercial and residential applications. CE Marked and compliant to applicable European Regulations.

OS Loop coordinator:

A modular smoke control system linking 1–64 remotely mounted manual control points (MCP's) via a coordinator. The coordinator contains the mains power conversion electronics which provides the 24 V DC power for operation. It also contains a back up battery supply. Each MCP contains actuator circuitry which also monitors actuator cabling and circuitry for faults. When a fault occurs a signal is went to the coordinator and from there to the remote alarms.

OS2 Control panel:

Suitable for standalone systems through to fully networked intelligent SHEV systems with BMS interface. Operates on a mains voltage primary power supply and contains integral fully monitored and intelligent battery backup for secondary power operation.

Maintenance:

The OSLoop Control System continuously monitors all components within the SHEVTEC® system for their status. Should any component device develop a fault then this will be indicated on the relevant manual control point via a yellow LED. Audible warnings can also be initiated. For centralised indication of status and faults (for example in a designated Fire Fighters entrance) the SHEVTEC® Repeater Panel should be used.

The OSLoop system includes real-time event logging. This enables the system to indicate when maintenance is required and gives the maintenance engineer full diagnostics if required.

Standards:

Tested to the principles of EN 12101-2.