MFT-FOX H-2L-Hoesch

The ventilated facade two layer system consists of horizontal/ vertical aluminium profiles and aluminium brackets (MFT-FOX H/HI).

The aluminium bracket has a pre-assembled connecting screw and additional washer allowing fastening in accordance with Eurocode with vertical adjustment of the aluminium bracket, MFT-FOX H/HI.

The horizontal first layer profiles must be fastened to the brackets with pre-assembly connecting screws, A4. Fixed and flexible points are not required as the thermal expansion of the profile is taken up by the flexibility of the bracket.

The second layer vertical profile has specially design Hoesch toothed strips to which the Hoesch sidings are attached and are supplied with elongated holes to allow the verticals profile to be fastened to the horizontal profiles with a stainless screw, S-MD51 LS for fixed and flexible points. Fixed points are created by placing two screws at the end of the elongated holes while flexible points consist of one screw.

Features and benefits:

• 40 mm adjustment capability of the profiles on the wall brackets.

• Powder coated bracket base plate for corrosion resistance.

• Bracket length: 55–300 mm (in 20 mm increments).

• Brackets can be installed using a range of methods—anchors, screws and direct fastening.

• Thermal bridge calculation in accordance with EN ISO 10211-1.

• Aluminium profiles according to EN 755-2; EN 573-3; EN 12020-2; EN 1090-3; EN AW 6063 T66 and EN1090.

• Individual design using the Hilti PROFIS Facade PC application guarantees technically optimized, cost-efficient solutions in accordance with Eurocode.

• The isolator separates the substructure from the base material reducing the thermal bridge (FOX HI).

• Easy to use with wind foil.

• No need for brackets of different sizes.

Applications:

System suitable for ventilated facade in new and refurbishment projects with metal cassette cladding material.