MB 2K Flexible Tanking Slurry - Multi-functional Waterproof Coating
Verified by manufacturer 2 months ago
Multi-functional waterproof coating.
Application
Flexible tanking slurry suitable for a range of uses, including:
- Rapid waterproofing.
- Waterproofing in new buildings.
- Horizontal waterproofing in and underneath walls.
- WTA-compliant retroactive waterproofing.
- Can be applied >3 m below ground.
- Approved for connecting to water impermeable concrete structures.
- Waterproofing of foundations and base points.
- Waterproofing in a bond.
- Bonding layer on old bitumen coatings.
- Repair of flat roof waterproofing on roofs of structures which are not habitations.
- For attaching perimeter insulation panels.
Description
Multi-functional waterproof coating, for application as a grout or slurry.
Features and benefits:
- Tested on crack formation of greater than 3 mm (according to DIN EN 14891).
- Complete drying and cross-linking occur rapidly, after just 18 hours.
- Meets the test requirements for PMBC.
- Radon-tight (verified through testing).
- Solvent-free.
- Bitumen-free.
- Water pressure tight.
- High tensile adhesion strength.
- Good adhesion on non-mineral substrates (e.g. plastics, metals).
- Three times as dimensionally stable as required.
- Highly flexible, elastic and crack-bridging.
- Can be covered after a very short time (≥ 4 hours).
- UV-resistant.
- Freeze/ thaw-resistant.
- Can be plastered and painted over.
- Can be applied as a grout, with a brush or trowel, or by spraying.
- CE marked to EN 14891: 2012.
Consult manufacturer's literature for substrate preparation guidelines.
General information
Color | Grey |
Finish | Smooth |
Material | Polymer Cement |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | M40/110 Tiling to J10/110 Proprietary mortar E60/325 Grouting C41/390 Grouting joints |
Specification data - Polymer-modified cementitious slurries
Third-party product certification | Declaration of Performance (DoP). |
Composition | Polymer binder, cement, additives, special fillers. |
Application rate | 1.1 kg/m²/mm. |
Crack bridging | To DIN EN 14891, ≥3 mm (with a dry layer ≥3 mm thick). |
Water vapour diffusion resistance | μ = 1755. |
WaterImpermeability | Tested up to an 8 m water column. |
Reaction to fire | To DIN EN 13501-1, Class E. |
Drying time | At 5 °C, 90% RH: Approximately 18 hours for a 2 mm layer. |
Compacted bulk density | 1.0 kg/dm³. |
Tensile strength | ≥0.5 N/mm². |
Colour | Grey. |
Sustainability data
Country of product manufacture | Germany |
Literature
MB 2K Technical Datasheet
MB 2K Brochure
MB 2K Technical Inspection Report
Remmers Podium Deck Waterproofing Technical Drawing