Mapefloor System 61 - Resin Flooring
Verified by manufacturer 3 months ago
Epoxy treatment system in water dispersion.
Application
Suitable for penetrating industrial concrete floors without a vapour barrier and traditional cementitious screeds. Can be used in:
- The chemical processing and pharmaceutical industries (in storage areas).
- Shopping centres (in storage areas).
- As a dust and oil repellent treatment for industrial floors which have been sprinkled down and smoothed over.
- As a dust repellent treatment in automated warehouse systems.
Description
Water-based epoxy treatment system for the protective impregnation of UltraTop, and as a primer for Mapefloor System 53. Requires use of Mapecoat I 600 W – consult manufacturer for information.
Features and benefits:
- Smooth and transparent.
- Will create industrial floors which are dust repellent, and resistant to oil and aggressive substances.
- Can withstand frequent washing, and the wear caused by trolleys and moving vehicles.
- Contains no solvents and is therefore safer for the environment.
- Long-lasting, with high resistance to wear and abrasion.
- Good wetting and impregnating properties.
- Guarantees a good cost-performance ratio.
Components required:
- Mapecoat I 600 W/A.
- Mapecoat I 600 W/B.
- Water.
May dry to a mottled effect due to the different absorption rates of substrates.
Consult manufacturer's literature for information on recommended substrate preparation and conditions not suitable for the application of this product.
General information
Finish | Matt |
Material | Water-based |
Uniclass | |
CAWS | M12/10 Resin flooring M12/110 Resin flooring |
Specification data - Floor surface coating resins
Resin | |
Colour | Transparent. |
Sheen | Matt. |
Product Reference | Mapefloor System 61 |
Consumption (per layer applied) | 1° coat 0.15 kg/m² and Finishing coat 0.05 kg/m². Manufacturer guidanceBased on an application temperature of 15–25°C on a smooth, compact concrete surface. |
Temperature range: | -20 ± 60°C (after 7 days at +23°C). |
Drying time | Suitable to be stepped on after 16 hours, while trolleys and forklifts are permitted after 24 hours. |
Sustainability data
Country of product manufacture | Italy |