Mapefloor System 61

Application

Suitable for penetrating industrial concrete floors without a vapour barrier and traditional cementitious screeds. Can be used in:

  • The chemical processing and pharmaceutical industries (in storage areas).
  • Shopping centres (in storage areas).
  • As a dust and oil repellent treatment for industrial floors which have been sprinkled down and smoothed over.
  • As a dust repellent treatment in automated warehouse systems.

Description

Water-based epoxy treatment system for the protective impregnation of UltraTop, and as a primer for Mapefloor System 53. Requires use of Mapecoat I 600 W – consult manufacturer for information.

Features and benefits:

  • Smooth and transparent.
  • Will create industrial floors which are dust repellent, and resistant to oil and aggressive substances.
  • Can withstand frequent washing, and the wear caused by trolleys and moving vehicles.
  • Contains no solvents and is therefore safer for the environment.
  • Long-lasting, with high resistance to wear and abrasion.
  • Good wetting and impregnating properties.
  • Guarantees a good cost-performance ratio.

Applications:

Suitable for penetrating industrial concrete floors without a vapour barrier and traditional cementitious screeds. Can be used in:

  • The chemical processing and pharmaceutical industries (in storage areas).
  • Shopping centres (in storage areas).
  • As a dust and oil repellent treatment for industrial floors which have been sprinkled down and smoothed over.
  • As a dust repellent treatment in automated warehouse systems.

Components required:

  • Mapecoat I 600 W/A.
  • Mapecoat I 600 W/B.
  • Water.

May dry to a mottled effect due to the different absorption rates of substrates.

Consult manufacturer's literature for information on recommended substrate preparation and conditions not suitable for the application of this product.

General information

Uniclass 2015

Pr_35_57_71_30 Floor surface coating resinsPrimary

CAWS

M12/10 Resin flooring

M12/110 Resin flooring

Specification data - Floor surface coating resins

Product Reference

Mapefloor System 61

Standard product features

Colour/ Finish:

Transparent/ matt.

Consumption:

Based on an application temperature of 15–25°C on a smooth, compact concrete surface.

– 1° coat:

0.15 kg/m².

– Finishing coat:

0.05 kg/m².

Technical characteristics (after 7 days at 23°C):

  • Temperature range (open air): -20 ± 60°C.
  • Suitable to be stepped on: After 16 hours.
  • Suitable for trolleys and forklifts: After 24 hours.

Similar products from Mapei (UK) Ltd

Mapefloor Comfort System AL

Mapefloor Comfort System AL

Mapefloor Comfort System AL/X

Mapefloor Comfort System AL/X

Mapefloor Comfort System AR

Mapefloor Comfort System AR

Mapefloor Comfort System AR/X

Mapefloor Comfort System AR/X

Mapefloor System 53