NBS Source
Mapefloor Comfort System AL

Application

Suitable for coating floors in internal civil environments and in the service sector, such as:

  • Hospitals.
  • Museums.
  • Bars.
  • Shops.
  • Schools and nurseries.
  • Apartments.

Not suitable for constant exposure to high temperatures and thermal shock.

Description

Self-levelling, elastic, smooth, coloured, aliphatic, polyurethane resin-based coating system with a total thickness of 2 mm.


Features and benefits:

  • UV resistant.
  • Attractive finish.
  • Easy to apply.
  • Very low emission level of VOC.
  • Reduces noise levels.
  • Soft and comfortable underfoot.
  • Helps to create seamless floors with no distribution joints.
  • A variety of colours are available.
  • Easy to maintain and clean.
  • Reduces the force of impact on the ground.
  • Resistant to chemical products commonly used to clean and maintain floors.


Components (in order of application):

  • Primer SN – coated onto the substrate.
  • Quartz 0.5.
  • Mapefloor PU 461.
  • Mapefloor Finish 58 W – transparent finish which gives the surface a matt effect.

Consult manufacturer's literature for information on recommended substrate preparation, mixing instructions and conditions not suitable for the application of this product.

General information

Finish

Matt

Material

Polyurethane

Uniclass

Pr_35_57_71_30 Floor surface coating resinsPrimary

CAWS

M12/10 Resin flooring

M12/110 Resin flooring

Specification data - Floor surface coating resins Enhanced data

Resin

-

Colour

Consult manufacturer and insert RAL colour requirement.

The transparency of the finishing product allows special aesthetic effects to be created in the base resin layer, e.g. the addition of coloured chips, or a mixture of shades formed by using different colours – consult manufacturer for information.

Sheen

Matt.

Product Reference

Mapefloor Comfort System AL

Consumption (per layer applied)

1° coat.

  • Primer SN: 0.7 kg/m² (may vary dependent on substrate preparation).
  • Quartz 0.5 (when sprinkled onto wet primer): 0.14 kg/m².
  • Quartz 0.5 (generally): 0.7–1 kg/m².

Self-levelling coating.

Mapefloor PU 461: 2.8 kg/m² (per 2 mm thick coat).

Finishing coat.

Mapefloor finish 58 W: 0.1–0.2 kg/m² (per coat).

Thickness

2 mm.

Drying time

(At 20°C).

Ready for foot traffic after 12 hours and completely hardened after 7 days.

Abrasion resistance

(After 7 days at 23°C).

Taber test, to EN ISO 5470-1, 30 mg.

Impact sound reduction

(After 7 days at 23°C).

EN ISO 10140, 2 dB.

Adhesion strength

(After 7 days at 23°C).

To EN 13892-8, Mapefloor PU 461 component, >3.5 N/mm² (failure of concrete).

Elongation at break

(After 7 days at 23°C).

To DIN 53504, Mapefloor PU 461 component, 75%.

Resistance to tearing

(After 7 days at 23°C).

To DIN 53515, Mapefloor PU 461 component, 25 N/mm².

TensileStrength

(After 7 days at 23°C).

To DIN 53504, Mapefloor PU 461 component, 9 N/mm².

Shore A hardness

(After 7 days at 23°C).

To DIN 53505 Mapefloor PU 461 component, 85.

Reaction to fire

(After 7 days at 23°C).

To EN 13501-1, Bfl-s1.

Similar products from Mapei (UK) Ltd

Mapefloor Comfort System AL/X

Mapefloor Comfort System AL/X

Mapefloor Comfort System AR

Mapefloor Comfort System AR

Mapefloor Comfort System AR/X

Mapefloor Comfort System AR/X

Mapefloor System 53

Mapefloor System 61

Mapefloor System 61