Polyester resin grout for the anchoring of steel bars.
Two component polyester anchoring grout supplied in pre-measured quantities. The material cures quickly to give consistent, high performance anchorages and conforms to the requirements of BS EN 1504-6. It is used for the anchoring of steel bars into concrete, brickwork, masonry and rock.
Can be placed underwater
Easy to mix and apply
Rapid strength gain
Two grades specifically for vertical and horizontal/ overhead use
C30/460 Bonded anchors
C51/540 Resin grout/ adhesive
E11/540 Bonded anchors for fixings to
G10/447 Bonded anchors
G20/715 Bonded anchors
Q40/40 Steel gates/ Gate posts
Q40/45 Gates/ Gate posts
Q41/113 Cycle barrier
Q41/115 Motorcycle barrier
Q41/117 Equestrian access/ vehicle barrier
Q41/135 Proprietary protective barriers
For horizontal and overhead holes.
For vertical downwards holes.
Standard product features
Thixotropic grade, 25 minute gel at 20°C. For use in overhead or horizontal holes where the hole is up to 25 mm greater in diameter than the bar.
Pourable grade, 25 minute gel time at 20°C. For use in vertical down holes where the hole is 8–40 mm greater in diameter than the bar.
© 2021 NBS Enterprises Ltd. All rights reserved.