Lokfix

Name: Lokfix
Brand: ebQTqHeU49vo7DuUPW2RZ
SKU: 3c23Xdbam6EdM6THipALS7

Fosroc International Limited

Polyester resin grout for the anchoring of steel bars.

Jump to:

+44 (0)1827 262222 www.fosroc.com

Description

Two component polyester anchoring grout supplied in pre-measured quantities. The material cures quickly to give consistent, high performance anchorages and conforms to the requirements of BS EN 1504-6. It is used for the anchoring of steel bars into concrete, brickwork, masonry and rock.

Features:

Can be placed underwater.

Corrosion resistant.

Easy to mix and apply.

Non-expansive.

Rapid strength gain.

Two grades specifically for vertical and horizontal/ overhead use.

Vibration resistant.

General information

Features	Can be placed underwater Corrosion resistant Easy to mix and apply Non-expansive Rapid strength gain Two grades specifically for vertical and horizontal/ overhead use Vibration resistant Show more
Uniclass 2015	Pr_20_31_53_52 Metal anchor and fixings groutsPrimary
CAWS	C30/460 Bonded anchors C51/540 Resin grout/ adhesive E11/540 Bonded anchors for fixings to G10/447 Bonded anchors G20/715 Bonded anchors Q40/40 Steel gates/ Gate posts Q40/45 Gates/ Gate posts Q40/560 Steel Q40/570 Gates Q41/113 Cycle barrier Q41/115 Motorcycle barrier Q41/117 Equestrian access/ vehicle barrier Q41/135 Proprietary protective barriers Show more

Specification data - Metal anchor and fixings grouts

Product Reference

Lokfix

Type

P25

For horizontal and overhead holes.

S25

For vertical downwards holes.

Standard product features	Technical properties: Chloride ion content: 0.00%. Compressive strength (to BS EN 12190): 100 MPa (28 days). Flexural strength (to BS 6319-3): 19 MPa (P25, 28 days), 20 MPa (S25, 28 days). Reaction to fire: Class B s1 d0. Tensile strength (to BS 6319-7): 11 MPa (28 days).
Product Options	Type: - P25: Thixotropic grade, 25 minute gel at 20°C. For use in overhead or horizontal holes where the hole is up to 25 mm greater in diameter than the bar. - S25: Pourable grade, 25 minute gel time at 20°C. For use in vertical down holes where the hole is 8–40 mm greater in diameter than the bar.