This site uses cookies to store information on your computer. Learn more about these cookies, and how to opt out of them. Find out more
Verified by manufacturer 6 months ago
Lobby smoke damper for rated mechanical smoke extraction shafts.
Suitable for fire rated mechanical smoke extraction shafts in multi-storey buildings.
Lobby smoke damper designed to satisfy smoke vent applications. It has been fire tested to the latest European fire damper test standard BS EN1366-2, and achieves a two-hour fire resistance performance to ES120.
The units are fitted in the wall between a lobby or corridor into a vertical smoke shaft. The top of the damper should be as high as possible but can be fitted at the same height as the head of the architrave.
Features and benefits:
Color | White RAL 9010. Black Inside of damper. |
Material | Steel |
Size | Insert requirement, available 400–1200 x 400–1500 mm in 100 mm increments. |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | U90/443 Dampers, fire and smoke U90/443 Dampers, fire and smoke |
Standard | - |
Test | To BS EN 1366-2. |
Classification | ES120. |
Material | Steel. |
Grille colourEntire inside of damper behind grille is spray painted matt black, fixing screws are colour matched to the grille. | RAL 9010 White. Standard. Special order. Insert requirement. |
Frame | 1.5 mm thick galvanized steel frame. With fully seam welded corners along the entire depth to produce a rigid and air tight construction. |
DamperDamper blades. | 0.7 mm thick galvanized double skin airfoil. Vertical 'opposed motion' to enhance air entrainment being ‘pulled’ into in smoke shaft. 0.7 mm thick galvanized double skin airfoil, 100 mm pitch with interlocking engagement when damper is closed. |
Gasket | 0.4 mm grade 301 stainless steel.. Peripheral gasketing around the entire perimeter. |
Drive | ‘Out of airstream’ mechanism. |
LeakageClassAmbient leakage (To BS EN 1366-2/ ISO10294-2). | Conforms to class ES (200 m³/hr/m² – 55 L/s/m²). |
Fixing | Pre-punched damper sleeve fixing holes. |
Dimensions | Insert requirement, available 400–1200 x 400–1500 mm in 100 mm increments. |