KS1000 RW Insulated Wall Panel System – QuadCore™

KS1000 RW Insulated Wall Panel System – QuadCore™

Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Kingspan Insulated Panels

Kingspan KS1000 RW trapezoidal wall panel system is a through-fix, insulated wall panel which can be installed vertically and horizontally.

Jump to:
+44 (0)1352 716100 www.kingspanpanels.co.uk
Application

Suitable for vertical and horizontal applications.

Description

Through-fix, steel-faced, QuadCore™ insulated wall panel system.

Features and benefits:

  • Panels are immune to attack from mould, fungi, mildew and vermin.
  • No urea-formaldehyde is used in the construction.
  • Panels are not deleterious.
  • An air leakage rate of 3 m³/hr/m² at 50 Pa or less can be achieved when the full building envelope is constructed using Kingspan panels.
  • Cover width: 1000 mm.
  • Horizontally-laid panels can be installed in a tiered or coursed arrangement.
  • Panels can be curved on the length or width, corners can be cranked or mitred depending on profile; consult manufacturer for details.
  • Matching KS1000 RW roof system available.

Applications:

Suitable for vertical and horizontal applications.

Approvals:

CE marked to BS EN 14509: 2013.

- Fire:

  • LPS 1181: 2014: Part 1: Issue 1.2, series of fire growth tests for LPCB approval and is certified to LPS 1181 Grade EXT-B, and achieves periods of fire resistance (EXT-A), for further information contact manufacturer's technical services department.
  • FM approval to FMRC 4880 & 4481 Class 1 fire classification, unlimited height.
  • FM 4882 for smoke sensitive occupancy: Class 1 for interior ceiling, unlimited height.
  • Reaction to fire classification according to BS EN 13501–1:2007+A1:2009: B-s1,d0.Class 1 Surface spread of flame to BS 476 Part 6: 2009 and Part 7: 1997 (Class 0 as defined by the Building Regulations).

Side rails and platforms supports:

Framed structure to be specified separately to include the following as required:

  • Multibeam eaves beams.
  • Multibeam side rails.
  • Multichannel side rails.
  • Multichannel trimmers.
  • Multichannel structural partitions

Warranties:

Kingspan Panel Protection Warranty covering the structural and thermal performance for a period of up to 40 years and Kingspan Coating Warranty for a period of up to 40 years (subject to project specific information).

General information

Features

Immune from mould, fungi, mildew and vermin, lightweight

Material

Steel

Size

29000 x 1000 x 40 mm

29000 x 1000 x 53 mm

29000 x 1000 x 60 mm

29000 x 1000 x 73 mm

29000 x 1000 x 80 mm

Show more

WarrantyDescription

40 year thermal and structural performance warranty, up to 40 year external coating warranty

Uniclass 2015

Ss_25_20_14_54 Metal insulating sandwich panel cladding systemsPrimary

CAWS

H43/10 Metal insulating sandwich panel

H43/120 Metal insulating sandwich panel

Specification data - Metal insulating sandwich panel cladding systems

Product Reference

KS1000 RW Insulated Wall Panel System – QuadCore™

Design

Insert drawing reference or similar.

Panel

-

Profile

Trapezoidal

Application

Horizontal

Vertical, left-handed

Vertical, right-handed

Thermal conductivity

0.12 W/m²K

Core thickness: 150 mm; overall thickness: 181 mm.

0.13 W/m²K

Core thickness: 137 mm; overall thickness: 168 mm.

0.15 W/m²K

Core thickness: 120 mm; overall thickness: 151 mm.

0.16 W/m²K

Core thickness: 115 mm; overall thickness: 146 mm.

0.18 W/m²K

Core thickness: 100 mm; overall thickness: 131 mm.

0.20 W/m²K

Core thickness: 91 mm; overall thickness: 122 mm.

0.23 W/m²K

Core thickness: 80 mm; overall thickness: 111 mm.

0.25 W/m²K

Core thickness: 73 mm; overall thickness: 104 mm.

0.31 W/m²K

Core thickness: 60 mm; overall thickness: 91 mm.

0.35 W/m²K

Core thickness: 53 mm; overall thickness: 84 mm.

0.47 W/m²K

Core thickness: 40 mm; overall thickness: 71 mm.

Material

Aluminium

Outer facing: 0.7 mm-thick; inner facing 0.5 mm-thick.

Steel

Outer facing: 0.5 mm-thick; inner facing 0.4 mm-thick.

Colour/ Finish

-

Colour/ Finish (external)

Kingspan XL Forté™, colour

Consult manufacturer's literature and insert requirements.

Kingspan Spectrum, colour

Consult manufacturer's literature and insert requirements.

Colour/ Finish (internal)

Kingspan CLEANsafe 15

Kingspan AQUAsafe

Kingspan AQUAsafe 55

Kingspan CLEANsafe 120

Stainless steel

Panel length

See ‘Options’ and insert requirements.

Cover width

1000 mm

Primary fasteners

-

Type

See ‘Options’ and insert requirements.

Number/ location

See ‘Options’ and insert requirements.

Secondary fasteners

-

Type

See ‘Options’ and insert requirements.

Number/ location

See ‘Options’ and insert requirements.

Seals

Required

Factory-applied side joint seals are available; consult manufacturer for details.

Not required

Continuity thermal insulation

Kingspan Kooltherm® PIR board insulation

Fill any gaps with fire-rated canister insulation.

Fabrications

-

Flashings

Required

Not required

Corner detail

Not required

As design

External corner flashing

Vertically-laid panels only.

Preformed corners

Horizontally-laid panels only; consult manufacturer for options and insert requirements.

Top hats

-

Type

Not required

Aluminium top hat, flush aluminium insert

Horizontally-laid panels only.

Aluminium top hat, recessed aluminium insert

Horizontally-laid panels only.

Aluminium top hat, rubber gasket infill

Horizontally-laid panels only.

Aluminium top hat, picture frame effect

With raised vertical and horizontal aluminium joint caps; horizontally-laid panels only.

Steel top hat, no insert

Horizontally-laid panels only.

Steel top hat, flush steel insert

Horizontally-laid panels only.

Steel top hat, recessed steel insert

Horizontally-laid panels only.

Steel top hat, raised feature detail

Horizontally-laid panels only.

Steel top hat, slimline, no insert

Horizontally-laid panels only.

Steel top hat, slimline, flush steel insert

Horizontally-laid panels only.

Steel top hat, slimline, recessed steel insert

Horizontally-laid panels only.

Steel top hat, slimline, rubber gasket infill

Horizontally-laid panels only.

Colour

Consult manufacturer's literature and insert requirements.

Specialist

Required

Consult manufacturer and insert requirements.

Not required

Light walls

-

Type

Not required

KS1000 DL Klick

Colour

Clear

Tinted, blue

Tinted, green

Tinted, infra-red blue

Tinted, infra-red green

Tinted, orange

Tinted, purple

Tinted, red

Tinted, yellow

Translucent

Accessories

Consult manufacturer and insert requirements.

Standard product features

Wall panels:

- Core insulation:

HCFC-, CFC-, HFC-free LPCB certificated QuadCore hybrid insulation core.

- Single figure weighted sound reduction index (Rw):

25 dB.

Product Options

Panel:

- Length:

  • Standard lengths: 1.8–14.5 m, or insert drawing reference.
  • Non-standard lengths of 14.5–29.3 m or <1.8 m are available on request; consult manufacturer for details.

- Weight:

  • 0.12 W/m²K: Aluminium: 9.9 kg/m²; steel: 14.2 kg/m².
  • 0.13 W/m²K: Aluminium: 9.4 kg/m²; steel: 13.7 kg/m².
  • 0.15 W/m²K: Aluminium: 8.7 kg/m²; steel: 13.0 kg/m².
  • 0.16 W/m²K: Aluminium: 8.5 kg/m²; steel: 12.8 kg/m².
  • 0.18 W/m²K: Aluminium: 7.9 kg/m²; steel: 12.2 kg/m².
  • 0.20 W/m²K: Aluminium: 7.6 kg/m²; steel: 11.9 kg/m².
  • 0.23 W/m²K: Aluminium: 7.1 kg/m²; steel: 11.4 kg/m².
  • 0.25 W/m²K: Aluminium: 6.8 kg/m²; steel: 11.2 kg/m².
  • 0.31 W/m²K: Aluminium: 6.3 kg/m²; steel: 10.6 kg/m².
  • 0.35 W/m²K: Aluminium: 6.0 kg/m²; steel: 10.4 kg/m².
  • 0.47 W/m²K: Aluminium: 5.5 kg/m²; steel: 9.8 kg/m².

- Colour/ Finish:

- External:

  • Kingspan XL Forté: Multi-layer organic coating, embossed with a traditional leather-grain finish.
  • Kingspan Spectrum: Coated semi-gloss finish with slight granular effect.

- Internal:

  • Kingspan CLEANsafe 15: For use as the internal lining of insulated panels. Standard colour is “bright white” with an easily cleaned surface.
  • Kingspan AQUAsafe: Developed for use as the internal lining of insulated panels to suit high humidity internal environments.
  • Kingspan AQUAsafe 55: For use as the internal lining of insulated panels to swimming pool internal environments.
  • Kingspan CLEANsafe 120: For use as the internal lining of insulated panels where a high level of cleanliness and hygiene is required, and the panels are to be cleaned down on a regular basis.
  • Stainless steel: For use as the internal lining of insulated panels in buildings with a very aggressive/ corrosive internal environment.

- Primary/ secondary fasteners:

Consult manufacturer for details and installation instructions.

Light walls:

- KS1000 DL Klick:

Kingspan Day-lite secret-fix, multi-wall polycarbonate wall light system with innovative joint detail for greater flexibility. Consult manufacturer's literature or technical team for full details.

  • Thickness: 40 mm.
  • Cover width: 500 mm.
  • Length: Up to 12 m as standard.
  • Weight: 4.0 kg/m².
  • Profile (external): Flat.
  • Thermal transmittance (U-value): 0.98 W/m²K.
  • Light transmission: 15–59%, depending on finish.
  • Solar heat gain coefficient: 0.37–0.64, depending on finish.
  • Weighted sound reduction: 20 dBA.
  • Application: Vertical installation.

Fabrications:

- Corner detail:

Kingspan provide a range of preformed corners as an alternative to standard corner flashing. Consult manufacturer for details of geometry, applications etc.

Digital objects
PlatformCompatibleVersionCertified to
IFC
- 2 2.1
Revit
- 2 2.1
Download now from NBS National BIM Library
Literature
Third party certifications
Similar products from Kingspan Insulated Panels