Kalzip Deck Roof System 0.20 U-Value
BBA Agrément Certificate
Certificate type
Metal profiled deck roof system, with a thermal transmittance (U-Value) of 0.20 W/m²K.
For roof applications.
Metal profiled deck roof system, with a thermal transmittance (U-Value) of 0.20 W/m²K.
All work undertaken should be fully in accordance with Kalzip standard recommendations and by Kalzip approved welding contractors. Site welding must be carried out fully in accordance with Approved Welding Procedure Specification ASW/TIG/001 Rev ‘B’ 1997 as defined in BS EN ISO 9606-2 for material gauges between 0.8–3 mm thickness. Site welding operatives must be certified to BS EN ISO 9606-2 standard for material gauges between 0.8–3 mm thickness. The weld test procedure shall be in accordance with BS EN ISO 15614-2: 2005.
Kalzip sheets to be installed as per cladding manufacturer's instructions, British Board of Agrément Certification No. 98/3481 and Institute fur Bautechnic Zulassungbescheid N R 14.1-181.
Features and benefits:
- The deck system is a variation of the standard liner system. A higher structural grade of steel is used to allow the clip rails to be positioned away from the main steelwork.
- Quick installation.
- Suitable for a wide range of applications.
Application:
For roof applications.
Features | Suitable for a wide range of applications. Steel and aluminium deck options |
Finish | Many options available |
Material | Kalzip profile: Aluminium alloy to BS EN AW 3004 (AlMn1Mg1), 0.2% proof stress (Rp0.2): 185 N/mm² (minimum). Ultimate tensile strength (Rm): 220 N/mm² (minimum) Deck profile: Galvanized steel to BS EN 1014, grade S220GD+Z with designation 275 coating Thermal insulation: Mineral wool insulation, manufactured in accordance with BS EN 13162 Profile fillers: Black closed cell cross-linked polyethylene with a minimum density of 30 kg/m³ |
Shape | To suit project requirements |
Size | To suit project requirements |
WarrantyDescription | Standard ten years |
Uniclass 2015 | |
CAWS | H31/10 Metal H31/120 Metal |
Product Reference | Kalzip Deck Roof System 0.20 U-Value |
Liner sheets | - |
Material | Kalzip Liner TR35/200S (trough perforated) |
Primary fasteners | 5.5 mm diameter carbon steel self-drilling fasteners (SD-8-T15-5.5x25). One fastener(s) to be installed in every valley at each sheet support |
End and side laps | 100 mm (minimum). Consult manufacturer for details and insert requirements. |
Vapour control layer | - |
Material | Kalzip VCL Clear - Reinforced virgin polyethylene with 530 MNs/g vapour resistivity |
Sealing | Seal with one row of sealant tape, not less than 50 mm |
Spacers | Support clips, steel reinforced polyamide Kalzip E-clips type E.160 with S10 and S5 spacer |
Acoustic insulation | Kalzip Acoustic Rockfibre Slab (Tissue faced) - Manufactured with ECOSE™ Technology |
Thermal insulation | Kalzip Insulation Quilt Type 1 - Manufactured with ECOSE™ Technology |
Material | Aluminium Standing Seam 65/400 |
End and side laps | Mechanically seamed over head of support clips with a Kalzip 'zipping' machine |
System accessories | Not requiredExtruded aluminium alloy (EN AW-6061) gable end hooksExtruded aluminium alloy (EN AW-6063) drip angle 40 x 20 mmExtruded aluminium alloy (EN AW-6063) flat bar 22 x 6 mmExtruded aluminium alloy (EN AW-6063) gable end channelExtruded aluminium alloy (EN AW-6063) tolerance gable clip extrusionFabricated aluminium alloy (EN AW-3004) flashingsMaterial and finish as per cladding sheets or as per project requirements - consult manufacturer for details. Fabricated aluminium alloy (EN AW-3004) ridge closures (KZ 65/400)Fabricated welded soaker unitsMaterial and finish as per cladding sheets or as per project requirements - consult manufacturer for details. Kalzip profile eaves fillers (KZ 65/400)Kalzip profile ridge fillers (KZ 65/400) |
Thermal transmittance (U-Value) | 0.2 W/m²K |
Pitch | 1.5° (minimum) |
Bearing width | 58 mm (minimum) |
Structural support | Cold rolled steel purlins |
Profile fillers | - |
Type | Kalzip profiled fillers |
Thickness | 30 mm minimum. Consult manufacturer and insert requirements. |
Finish | Aluminium, AluPlusPatinaAluminium, natural stucco embossedAluminium, with a PVDF paint coatingAluminium, with an HPC paint coatingAluPlusZincCopperStainless steel |
Standard product features | Colour: To suit project requirements. Features: Suitable for a wide range of applications. Steel and aluminium deck options. Finish: Many options available. Material:
Shape: To suit project requirements. Size: To suit project requirements. Warranty description: Standard ten years. Recycled content: 100% recycled aluminium top sheet. Recyclability: Excellent. Embodied carbon: Refer to EPD certificate. Red Listed materials: None. Country of origin: Germany. |
Embodied carbon | Refer to EPD certificate |
Recyclability | Excellent |
Recycled content | 100% recycled aluminium top sheet |
- 98/3481