Compare

Jabfloor HP & HP+ - Floor Insulation

Name: Jabfloor HP & HP+ - Floor Insulation
Brand: BEWI UK Insulation
SKU: 8tipXQnTHK9HPRUyAZTLxk

Verified by manufacturer 1 day ago

Jabfloor HP 70

BEWI UK Insulation

Product certifications:

BBA Agrément Certificate
Certificate type

Expanded polystyrene (EPS) insulation for use in ground bearing and suspended floor constructions for both new and existing domestic and commercial buildings.

Jump to:

+44 (0)870 600 3666 Website

Application

Suitable for use below slab in solid ground floors.

Description

Jabfloor HP and HP+ is a closed-cell expanded polystyrene (EPS) insulation board for use below slab or over slab with a screed or timber board finish in ground-bearing or suspended concrete floors.

Jabfloor HP and HP+ is grey in colour due to the carbon additive which acts within the boards to disperse and reflect heat radiation. This gives the boards an improvement in thermal performance compared to white EPS.

Jabfloor HP and HP+ does not degrade when placed in high moisture areas and is resistant to the effects of freeze-thaw. It will remain an effective insulation for the life of the building.

Jabfloor HP and HP+ is lightweight and easy to install. There are no requirements for special PPE when installing or cutting Jabfloor HP and HP+.

Features and benefits:

Available in a range of compressive strengths to suit building types from domestic to commercial.
Approved by BBA as Jablite Floor Insulation High Performance, certificate number 21/5858.
NHBC approved.
Can withstand temperatures of up to 80°C, making it suitable for use with underfloor heating systems.
Ozone depletion potential (ODP) of zero and a global warming potential (GWP) of less than 5.

General information

Color	Grey
Material	Expanded polystyrene (EPS)
Shape	Rectangle
Length	2400 mm
Width	1200 mm
Height	25 mm 30 mm 40 mm 50 mm 60 mm 75 mm 100 mm 150 mm 200 mm Show more Manufacturer guidance Other thicknesses available.

Uniclass	Pr_25_71_63_26 Expanded polystyrene (EPS) boardsPrimary
CAWS	E20/30 Underslab insulation E20/200 Proprietary underslab insulation

Specification data - Expanded polystyrene (EPS) boards

Standard	To BS EN 13163.
Third-party certification	BBA certified. Guidance for specification option: Assessed and approved by the British Board of Agrément for use below slab in solid ground floors. Certificate number 21/5858.
Fire performance	Guidance for specification option: Solid ground floors are not required to provide fire resistance. When properly installed Jabfloor is fully protected by the concrete slab and will have no adverse effect on the fire performance of the building into which it is installed. Jabfloor HP and HP+ is supplied as non-flame retardant material as standard.
Compressive strength (minimum) at 10% compression	70 kPa.
Thermal conductivity (maximum)	0.032 W/m·K.
Thickness	25 mm. 30 mm. 40 mm. 50 mm. 60 mm. 75 mm. 100 mm. 150 mm. 200 mm. Manufacturer guidance Other thicknesses available, consult manufacturer for details.
Face size (nominal length x width)	2400 x 1200 mm.