Italia-100 Fencing
Description

Italia-100 is a rigid steel louvred fencing system which offers a high degree of perimeter protection combining 100% visual screening, anti-climb properties and good protection against the rain.

The louvre profile is formed from triple flanged 69 x 1.5 mm flat bars which overlap to provide total screening and a linear aesthetic. The louvres are secured by electrofusion to 4 mm diameter vertical round bars.

Single leaf, double leaf, pivot, cantilevered or sliding gates are made to match with Italia-100 infill. Optional entry/ exit controls can be supplied for restricted access with automatic activation in the event of fire alarm.

Louvre fences are supplied in accordance with BS 1722-14.

Panels and posts can be supplied galvanized only or galvanized and powder coated to any RAL colour.

General information

Finish

Hot dip galvanized

To BS EN ISO 1461.

Hot dip galvanized and polyester powder coated

Insert RAL or BS colour to BS EN ISO 1461 and BS 1722–16.

Material

Electrofused steel S235JR

Uniclass 2015

Ss_25_14_63_11 Carbon steel continuous bar fencing systemsPrimary

CAWS

Q40/126 Open mesh steel panel security fencing

Q40/30 Proprietary fencing

Q40/430 Proprietary fencing

Specification data - Carbon steel continuous bar fencing systems

Product Reference

Italia-100 Fencing

Italia-100 Vertical Fencing

Panel

-

Height

967 mm

1196 mm

1608 mm

1745 mm

1975 mm

2479 mm

2616 mm

2937 mm

Width

1962 mm

Posts

-

Straight section

60 x 40 mm RHS

For panel heights: 967, 1196, 1608 or 1745 mm.

80 x 40 mm RHS

For panel height: 1975, 2479 or 2616 mm.

100 x 50 mm RHS

For panel heights: 2937 mm.

Corners

60 x 60 mm SHS

For panel heights: 967, 1196, 1608 or 1745 mm.

80 x 80 mm SHS

For panel heights: 1975, 2479 or 2616 mm.

100 x 100 mm SHS

For panel height: 2937 mm.

Fixing

For anchoring within wall pockets

For ground fixing

Off-set over top of wall

With base plates for fixing to a concrete foundation

Finish

Hot dip galvanized

To BS EN ISO 1461.

Hot dip galvanized and polyester powder coated

Insert RAL or BS colour to BS EN ISO 1461 and BS 1722–16.

Other requirements

None

Rolled to a radius

Standard product features

Material:

Electrofused steel S235JR.

Framing and fixing:

The panels are framed on two sides with flat bars. This flat bar projects behind the louvre to provide a fixing zone for a bolted panel-to post-connection.

Orientation:

Fences are generally designed with horizontal louvres and with the louvre blades sloping downwards on the outside of the enclosed area.

Installation:

  • Fastenings: Panels fixed to posts with stainless steel bolts with domed heads and snap-off security nuts, all stainless steel grade A2.
  • Groundwork: Refer to BS 1722 giving consideration to existing ground conditions. Posts to be set in holes 300 to 400 mm square in plan and between 550 and 700 mm in depth, depending on fence height. Holes should be completely filled to a minimum of 50 mm below ground level with concrete mix (minimum strength of C20).
  • Height from ground: Panels to sit 100 mm (maximum) off ground.
  • Changes in level: Fence panels stepped to 150 mm (maximum) on standard length post. Post centres to be reduced for steeper gradients (between 1:20 and 1:7).
  • Changes in direction: 60 x 60, 80 x 80 or 100 x 100 mm SHS or RSA for 90 degree corner post. Composite flat bar posts for other angles.

Product Options

Product reference:

Italia-100 Vertical is designed with vertical louvres. This provides a variable degree of visual screening depending on the angle of view.

  • Panel heights: 930–2500 mm.
  • Panel width: 1992 mm.
  • Post: 100 x 55 mm I-section.

Panel:

Fence heights of 2479 mm and above are supplied as two panels which stack together. Non-standard heights and widths fabricated upon request.

Posts:

Alternative lengths and style of post:

  • For ground fixing.
  • With base plates for fixing to a concrete foundation.
  • Off-set over top of wall.
  • For anchoring within wall pockets.

Finishing:

Polyester powder coating is a multi-stage process which applies thermo-setting resins producing a superior finish to painting.

Other requirements:

- Bespoke designs:

Panels with vertical louvres can be rolled to a radius.

Literature
Similar products from Lang+Fulton