Two component epoxy anti-corrosive primer pigmented with zinc phosphate.
For use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems for use in the offshore, petrochemical, chemical, pulp, paper and bridge industries. Not designed for continuous water immersion.
The fast-drying and handling properties of Intergard 251 coupled with extended overcoatability make this an suitable primer for factory application prior to full system application on site. Intergard 251 is a two component anti-corrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.
Features and benefits:
G10/630 Galvanizing plus site-applied
G10/635 Thermally sprayed zinc coating plus site-applied
G10/638 Shop priming
G10/640 Shop painting
G10/643 Protective painting
G10/65 Shop priming for
G10/650 Site painting
G10/660 Shop plus site painting
G12/20 Shop priming
G12/330 Proprietary metal members
G12/650 Shop priming
Wet film thickness (minimum)
Dry film thickness
Intergard 251 is designed for application to correctly prepared steel. However, it is also possible to apply over approved prefabrication primers, Further details of these can be obtained from International Protective Coatings.
Mist coat or tie coat may be required.
© 2022 NBS Enterprises Ltd. All rights reserved.