Verified by manufacturer 4 months ago
A two component, high solids, low VOC, epoxy zinc phosphate/ micaceous iron oxide primer.
As a primer for steelwork intended for use in a wide range of environmental conditions, including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. The rapid curing and overcoating properties of Intercure 324 provide production flexibility, making this product suitable for use both in new construction and on site as an industrial maintenance coating.
Intercure 324 is preferred for use with systems for chemical environments where zinc-based materials can be subject to attack in both acidic and alkaline conditions. It is not intended for use as a primer for steelwork which may be subjected to continuous immersion conditions.
Intercure 324 will normally be applied to suitable prepared steel, e.g. blast cleaned. However, if necessary, application over prefabrication blast primers can be performed. Consult International Protective Coatings for further details.
Features and benefits:
Color | Yellow Guidance for specification option: Sand. |
Finish | Matt |
Material | Epoxy |
Uniclass | |
CAWS | G10/630 Galvanizing plus site-applied G10/635 Thermally sprayed zinc coating plus site-applied G10/638 Shop priming G10/640 Shop painting G10/643 Protective painting G10/65 Shop priming for G10/650 Site painting G10/660 Shop plus site painting G12/20 Shop priming G12/30 Proprietary G12/330 Proprietary metal members G12/650 Shop priming |
Composition | Zinc phosphate. |
Product Reference | Intercure® 324 |
Wet film thickness (minimum) | 104–139 μm. Guidance for specification option: Microns wet. |
Dry film thickness | 75–100 μm. Guidance for specification option: Microns dry. |
Top coat | Intercure 384. Intercure 420HS. Intercure 422. Interfine 629HS. Intergard 410. |