Inter-loc Horizontal Cavity Tray Lead Attached (Brick, Stone and Blockwork) for New Build and Refurbishment

Name: Inter-loc Horizontal Cavity Tray Lead Attached (Brick, Stone and Blockwork) for New Build and Refurbishment
Brand: rujg7pxd1hcjn7NftJYujp
SKU: wy6NJyUXxPXN6LGfet37BM

Timloc Building Products

A horizontal cavity tray system for new build and existing masonry construction.

Jump to:

+44 (0)1405 765567 www.timloc.co.uk

Description

Inter-loc with lead is pre-formed horizontal cavity tray system for new build and existing external leaf masonry construction generally not exceeding 103 mm thick and for cavity widths of between 50 mm and 125 mm.

Features:

Project specification and scheduling service available.

Supplied with factory fitted lead flashing ready cut to suit the location and type of abutting roof covering.

150 mm high back upstand.

Low profile lapped joint between sections allows any length of brick, block or stone to be used without difficulty.

Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.

Suitable for brick, block and stone wall construction (cutting of masonry may be required).

Interlocking mechanism for joining tray lengths eliminates tray jointing.

Cavity tray builds into the outer leaf only to speed up installation to allow both inner and outer leafs to be built independently if required.

General information

Features

Project specification and scheduling service available

Supplied with factory fitted lead flashing ready cut to suit the location and type of abutting roof covering

150 mm high back upstand

Low profile lapped joint between sections allows any length of brick, block or stone to be used without difficulty

Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf

Material

2 mm thick polyethylene

Uniclass 2015	Pr_25_57_21_66 Preformed cavity traysPrimary
CAWS	F30/370 Preformed cavity trays F30/56 Preformed cavity trays

Specification data - Preformed cavity trays

Product Reference	Inter-loc Cavity Tray Attached Lead Flashing
Location	As shown on drawings
Cavity width	___ mm Within range 50 mm to 125 mm.
Length of lead flashing	Long (300 mm) Where flashing is required to dress directly over the top of the roof tile. Short (150 mm) Where there is a soaker or secret gutter detail.
Horizontal tray product code	Inter-loc 2-150L 2 brick effective length, 150 mm lead drop length. Inter-loc 2-300L 2 brick effective length, 300 mm lead drop length. Inter-loc 4-150L 4 brick effective length, 150 mm lead drop length. Inter-loc 4-300L 4 brick effective length, 300 mm lead drop length.
External Corner, product code	Not required Ext 90-150L 90° 2/4 brick effective length, 150 mm lead drop length. Ext 90-300L 90° 2/4 brick effective length, 300 mm lead drop length. Ext 135-150L 135° effective length 330 mm, 150 mm lead drop length. Ext 135-300L 135° effective length 330 mm, 300 mm lead drop length.
Internal Corner, product code	Not required Int 90-150L 90° 2/4 brick effective length, 150 mm lead drop length. Int 90-300L 90° 2/4 brick effective length, 300 mm lead drop length. Int 135-150L 135° effective length 150 mm, 150 mm lead drop length. Int 135-300L 135° effective length 150 mm, 300 mm lead drop length.

Standard product features	External masonry leaf thickness: 103 mm. Material: 2 mm thick polyethylene. Attached flashings: Code 4 milled lead. Colour: Black.