Elastomeric EPDM membrane for sealing interfaces.
An EPDM-based membrane used for sealing interfaces to provide airtight or weather tight seals. Used for weather sealing the exterior side of the connecting joint between a window or façade construction and an adjacent structure (e.g. wall, concrete panel, steel frame, etc.) or to provide an internal airtight barrier in a similar detail.
L10/75 Sealant joints
L10/810 Sealant joints
L20/80 Sealant joints
L20/820 Sealant joints
illbruck ME220 EPDM Membrane
CT113 Contact adhesive
Diluted with AW421 solvent at ratio of 1:3.
Special order only.
Insert width. Available 50–1500 mm in 50 mm increments.
Gasket for locating to profiles
Standard product features
Acrylic and butyl self-adhesive strips for fixing to frame and construction substrate. Maximum membrane width of 300 mm.
Also available as ME220 VV with full face self-adhesive backing.
For low temperature or wet weather applications, or if mechanical retention for the membrane is preferred, there are four gasket options which can be used in conjunction with a suitable groove on the frame profile. Membranes with gaskets can be supplied with or without a butyl self- adhesive strip for fixing to the structure (standard format is without adhesive).