Hyload Gastite LL Trade DPM

Hyload Gastite LL Trade DPM

IKO PLC Third party certifications:
  • QA Certificate

    QA Certificate

    Certificate type

Loose-laid, gas resistant damp proof membrane (DPM).

Jump to:
+44 (0)1257 255 771 www.ikogroup.co.uk

Application

Typically used within floor constructions, such as ground bearing concrete slabs, beam and block floors, and structural suspended floor slabs.

The product does not currently conform to the requirements of ground gas protection measures designed to BS 8485: 2015 - consult manufacturer for details.

Description

Loose-laid, gas resistant damp proof membrane (DPM), manufactured from a flexible virgin grade polyethylene sheet material. When used within a suitably designed ground gas system, it serves to resist gas migration through floor constructions where sites are affected by hazardous ground gases such radon and methane. In addition to this, the product also acts as a damp proofing membrane at or above ground level, in instances that are not subject to hydrostatic pressure.

The damp proof membrane is a gas barrier for use within ground gas protection systems designed in accordance with the guidance of CIRIA C665 and NHBC Traffic Light system.

Features and benefits:

  • Gas resistant – produced from virgin grade polyethylene, the product offers a defined material resistance to gas.
  • Ease of use – does not require specialist skills to install.
  • Developed components – has a full range of system components.
  • When properly specified and installed, the system in normal circumstances, will remain effective for the lifetime of the building.
  • CE marked.

Applications:

Typically used within floor constructions, such as ground bearing concrete slabs, beam and block floors, and structural suspended floor slabs.

The product does not currently conform to the requirements of ground gas protection measures designed to BS 8485: 2015 - consult manufacturer for details.

General information

Uniclass 2015

Pr_25_57_65_60 Plastics sheetsPrimary

CAWS

J40/140 Loose laid plastics or rubber sheet gas retardant damp proofing

J40/35 Loose laid plastics or rubber gas retardant damp proofing

Specification data - Plastics sheets

Product Reference

Hyload Gastite LL Trade DPM, 30831000

Accessories

Not required

IKO Flashing Tape

IKO Hyload Jointing Tape No2

IKO Hyload Jointing Tape No3

IKO Hyload Pre-formed Cloak Units

IKO Hyload Protection Board

Standard product features

Composition:

Virgin-grade polyethylene.

Roll size:

2 x 25 m.

Roll colour:

Orange.

Technical characteristics:

  • Nominal thickness: 500 µ.
  • Methane gas permeability (to ISO 2782:1995): 1.248^10-9 m²/s·Pa.
  • Radon gas permeability: 8 E-12 m²/s ± 15%.
  • Visible defects (to EN 1850-2): Pass.
  • Water tightness 2kPa (to EN 1928): Pass.
  • Tensile strength (to EN 12311): Cross direction (CD): 21 N/mm², machine direction (MD): 21.2 N/mm².
  • Elongation (to EN 12311): CD: 695%, MD: 632%.
  • Joint strength (to EN 12317-2): 281 N.
  • Resistance to impact (to EN 12691): 250 mm.
  • Durability (to EN 1296): Pass.
  • Artificial ageing (to EN 1928): Pass.
  • Chemical resistance (to EN 1847): Pass.
  • Resistance to static loading (to EN 12730): Soft - Pass, Hard - Pass.

For detailed information regarding chemical and gas performance, consult manufacturer.

Product Options

Accessories:

  • IKO Hyload Jointing Tape No2 – Black, double sided butyl mastic tape in 50 mm x 10 m rolls for bonding damp proof membranes at overlaps and for bonding damp proof membranes to IKO Hyload damp proof courses at junctions with internal and external walls.
  • IKO Hyload Jointing Tape No3 – Single-sided PVC tape in 75 mm x 33 m rolls for securing overlap detailing at the free edge and is essential to ensure robustness at joints.
  • IKO Hyload Jointing Tape No3 – Single-sided PVC tape in 75 mm x 33 m rolls for securing overlap detailing at the free edge and is essential to ensure robustness at joints.
  • IKO Flashing Tape – ‘Hi-tack’, single-sided metal surfaced bitumen tape.
  • IKO Hyload Protection Board – 3 mm thick, flexible, load bearing and rot proof polymeric board. Used for the protection of membranes against damage from backfill operations, foot traffic or the process of positioning spacers and reinforcement prior to laying a reinforced concrete slab.
  • IKO Hyload Pre-formed Cloak Units – Covering all aspects of detailing from stop ends to complex and awkward interface detailing, IKO Hyload Pre-formed cloak units reduce on site detailing work to a rapid position and fix operation, whilst providing consistent quality of work throughout. Includes internal corner cloaks, external corner cloaks, and pipe penetration cloaks.

Ultrasonic welding technology allows the semi-rigid polymeric cloak material to be formed into a vast number of profiles and shapes. Consult manufacturer for details.

Literature

Third party certifications

  • CE Marked: Certificate: 0836-CPR-13/F064

Similar products from IKO PLC