HD1014 Hush System 2003 Overlay Acoustic Floor

HD1014 Hush System 2003 Overlay provides an effective sound insulation solution for separating floors in refurbishment projects constructed using timber joists.

This fully tested system treats both the floor and ceiling, bringing together Hush Panel 28 floating floor panels, Hush Seal 20 and Hush Slab 100 sound absorbers fitted to Hush Bar resilient bars.

HD1014 is a system which can upgrade the acoustic performance of traditionally constructed timber joists floors/ceilings with relative ease.

Tested as a complete system, HD1014 provides assured performance and is fully compliant with the Building Regulations relating to sound insulation - Approved Document E (England & Wales), Section 5 (Scotland) and Part G (Northern Ireland).

How HD1014 is formed:

• Hush Panel 28, with all tongue and groove joints glued using Hush Bond, is laid over 18/ 22 mm T&G chipboard/plywood or the existing floorboards.
• The perimeters of the Hush Panel 28 sound insulating boards are sealed using Hush Seal 20.
• Hush Slab 100 is then fitted between joists with Hush Bars screw fixed to the underside of joists at 600 mm centres.
• Two layers of 15 mm Soundbloc plasterboard are then installed to the underside of the Hush-Bars, and all perimeters are sealed prior to skimming.

Acoustic performance *

Impact (L’nT,w) - 51 dB

Airborne (DnT,w) - 58 dB

Airborne (DnT,w + Ctr) - 49 dB

* Results based on all Hush Components of the Hush System HD1014 being used and installed correctly as per the Hush Installation guides. It is recommended that the structure consists of a minimum 200 mm timber joist.

Features and benefits:

• For use in refurbishment and conversion developments where a joisted structure is in place.
• Building Regulations Approved Document E (England & Wales), Technical Handbook Section 5 (Scotland) and Technical Handbook G (Northern Ireland) compliant.

Components:

• Hush Panel 28.
• Hush Bond – to glue joints.
• 18/ 22 mm thick particleboard/ plywood deck or existing floorboards – supplied by others.
• Hush Seal 20 – to seal perimeters.
• Existing timber joists.
• Hush Slab 100 – fitted between the joists.
• Hush Bars – screw fixed to the underside of joists at 600 mm centres.
• Two layers of 15 mm thick Gyproc Soundbloc plasterboard – supplied by others.