NBS Source
List your products
General information
Uniclass 2015
Hand dryers (Pr_40_70_62_37)Primary
Specification data - Hand dryers
Product Reference

B-7120 Dryer

With white painted cover.

B-7128 Dryer

With stainless steel cover.

Voltage

115 V

208–240 V

Standard product features

Cover:

18-gauge, type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or 22-gauge carbon steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim and side panels. Cover equipped with uniquely designed dual air outlets. Air-inlet is equipped with vandal-resistant grille. Cover projects no more than 100 mm from wall and is secured to mounting base with two vandal-resistant, recessed hex screws.

Mounting base:

20-gauge (1.5 mm) plated steel with four (6 mm) diameter mounting holes.

Dimensions:

350 wide x 345 high x 100 mm deep.

Motor:

Universal, 1/7 hp, 8000 rpm, on resilient mounting. Sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at non-drive end. Equipped with automatic thermal-overload switch.

Fans:

Two balanced, double-inlet centrifugal fans are mounted on motor shaft; directs airflow over heating element at 71 cfm.

Heating element:

Two coiled nickel-chrome heating elements are mounted in mica frame and protected by automatic thermal-overload switches. Heating elements, heat air without hot spots - inaccessible to vandals.

Electronic control:

Infrared sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.

Operation:

No-touch operation: electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Dual air outlets provide a swirling circulation of airflow for comfortable hand drying. Drying time less than 25 s. Remove hands from path of sensor and dryer stops. Dryer operates only when actually drying hands, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.

Product Options

Voltage:

  • 115 V a.c., 15 A, 1725 W, 50/60 Hz, single phase, cULus listed.
  • 208–240 V a.c., 6.8-7.8 A, 1400–1900 W, 50/60 Hz, single phase, cULus listed, VDE and CCC approved, CE marked.

Literature
Similar products from Bobrick Washroom Equipment Ltd