Verified by manufacturer 1 month ago
V26 Traditional double triangle wall ties
ISO 14001 Environmental Management Systems
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type
General purpose wall ties for securing two leaves of a cavity wall to each other, allowing them to act as one structurally.
For securing two leaves of a cavity wall to each other, allowing them to act as one structurally.
Features and benefits:
Color | Silver |
Material | Stainless steel Guidance for specification option: Grade 304. |
Length | 150 mm Guidance for specification option: V26 only. 200 mm Guidance for specification option: EN2. 225 mm Guidance for specification option: EN2. 250 mm Guidance for specification option: EN2 or V26. 275 mm Guidance for specification option: VE2 only. |
Uniclass | |
CAWS | F30/25 Cavity wall ties used with partial fill insulation F30/215 Cavity wall ties used with partial fill insulation F30/220 Wall ties F30/26 Wall ties F30/24 Cavity wall ties F30/214 Cavity wall ties |
Standard | To BS EN 845-1. |
Tie type | PD 6697 Type 2 (Masonry – general purpose).Guidance for specification option: Traditional double triangle, general-purpose wall tie used in small commercial buildings and domestic properties. Suitable for buildings with a maximum height of 15 m and cavity widths from 0–150 mm. Multidrip feature to prevent moisture travelling across the cavity. Design means the tie can be installed either way up. |
Material | Grade 304 stainless steel. |
Length | 150 mm.Guidance for specification option: PD 6697 Type 2 (Masonry – general purpose). Cavity: 0 mm. 250 mm.Guidance for specification option: PD 6697 Type 2 (Masonry – general purpose). Cavity: 101–125 mm. Supplied in boxes of 250. Manufacturer guidanceSupplied in boxes of 250. 275 and 300 mm ties also available, specified separately (see Type 3 Wall Ties). |
End types | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Design embedment length (minimum) | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Movement | Manufacturer's standard. |
Additional requirements | |
Mortar joint thickness (minimum) | Guidance for specification option: Consult manufacturer for details. |
Resistance to water crossing cavity | Resistant (multidrip feature). |
Slope tolerance | Manufacturer's standard. |
Compressive load capacity | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Tensile load capacity | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Dynamic stiffness | Type B. |
Tie-mounted insulation retaining clips | ECO-clips.Guidance for specification option: Universal 80 mm-diameter insulation clip made using less plastic for reduced environmental impact. Supplied in bags of 250 or 50. Not required. |
Third party accreditation | UKCA marked. |
Contains Red List materials | No |
Country of product manufacture | United Kingdom |
Recyclability | Recyclable |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
General Purpose Wall Ties - Type 3 - Traditional Double Triangle
Heavy Duty Wall Ties - Type 1 - Cavity Tie
High Movement Timber Frame Ties - Type 7 - V62
Housing Wall Ties - Type 4 Light Duty - Cavity Tie
Low Thermal Conductivity Wall Ties - Helical Cavity Tie
Remedial Wall Tie - Wavy Tail Ties
Timber Frame Ties - Type 6 - V61
Two Part Wall Ties - Cavity Tie
Universal Insulation Clips (ECO) - For Use With Movement Ties