NBS Source
Flexible Gas Barrier Top Hat Collars
Compare variants

Flexible Gas Barrier Top Hat Collars

77110, top hat pipe collar, 110 mm diameter

Timloc Building Products Variant:

Flexible top hat collars for sealing to a gas barrier and at the intersection of pipe projections.

Jump to:
+44 (0)1405 765567 www.timloc.co.uk

Application

  • Designed to be flexible enough to fit around difficult applications and is perfect for use in tight situations where a pipe is located close to a wall.
  • In areas outlined in BRE document ‘Radon’ guidance on protective measures in new dwellings.
  • When gas protection is required across the footprint of the building.
  • Crossing cavity wall constructions to maintain gas barrier integrity.
  • Forming internal perimeter trays to allow membranes continuity.
  • Collars for service pipe protrusions.
  • Following a risk assessment where the requirement is for a good gas protection measure against radon, carbon dioxide (CO2), methane and hydrocarbons.
  • To be designed and installed in a continuous system around the whole building perimeter.

Description

Flexible top hat collars for sealing to a gas barrier and at the intersection of pipe projections.


Features and benefits:

  • Preformed mouldings eliminate the need for site fabrication to prevent errors through poor workmanship.
  • Easy to handle, flexible, tough, durable and puncture resistant.
  • Can be used for multi-storey or high-loading applications – will not extrude under high loads up to the point of compression failure of wall.
  • Wide range of standard components with special tailor made accessories also available.
  • Fully itemized scheduling service.
  • Flexible top hat collars also available, specified separately.


Quality:

  • Manufactured to BS EN ISO 9001 and BS EN ISO 14001.
  • Satisfies all NHBC requirements.
  • Meets BRE requirements.
  • Complies with Building Regulation Approved Documents C1 and C2.
  • Meets all relevant British Standards.

General information

Color

Black

Material

Polyethylene (PE)

Polypropylene (PP)

Uniclass

Pr_35_90_30_64 Polyethylene (PE)-based flashingsPrimary

CAWS

D21/50 Ground level vent outlets

P12/43 Pipe collar

P12/370 Pipe collar

D21/395 Ground-level vent outlets

Specification data - Polyethylene (PE)-based flashings Enhanced data

Item

Top hat pipe collar.

Width (minimum)

110 mm.

Recycled content (maximum)

Manufacturer's standard.

Thickness (minimum)

2 mm.

Colour

Black.

Accessories

None.

GTAPE01 - Gastite sealing tape 15 m x 100 mm.

GTAPE02 - Girth tape 75 m x 50 mm.

Literature

Top Hats & Flexible Top Hats

Top Hats & Flexible Top Hats

Similar products from Timloc Building Products

1201 Telescopic Underfloor Vent Gas Barrier Top Hat Collar

1201 Telescopic Underfloor Vent Gas Barrier Top Hat Collar

Jubilee Clips for Top Hat Collars

Jubilee Clips for Top Hat Collars

Rigid Gas Barrier Top Hat Collars

Rigid Gas Barrier Top Hat Collars