Fireroll Acoustic E120 Roller Shutters
Application

Suitable for any application where fire and sound compartmentation are required. Also suited to school kitchens in multi-function school halls where regulations dictate that fire resistance is necessary, but where a sound break is also essential to avoid disruption from the kitchen staff. Larger applications include exhibition halls where its incorporation allows sound and fire resistance at a fraction of the price of other door types such as movable walls.

Description

Fire-resisting acoustic roller shutters, tested at the Department of Acoustics at Salford University and two Fire Test Laboratories. The door achieved a sound reduction of 25 dB Rw and fire-tested to EN 1634-1. It is rated E120-C0 in accordance with EN 13501-2, EN 14600, EN 15269-10 and EN 16034.

Features and benefits:

  • Curtain: constructed from 100 mm flat section galvanized steel laths with acoustic/ fire-resisting infill and steel end locks fitted to the laths to prevent lateral movement. The bottom rail is a lath fitted with a galvanized steel trim section.
  • Guides: the side guides are formed from galvanized steel double rebate channels, and are prepared for fixing to the opening structure by means of continuous fixing profiles.
  • End plates: fabricated from carbon steel of adequate thickness relative to door size, and supplied with angles for fixing to the structure.
  • Casing: a galvanized steel casing is supplied as standard.
  • Roller: the roller is manufactured from mild steel tube of sufficient diameter and wall thickness to resist deflection, and is mounted in bearings on each end plate. A safety brake is included to comply with the safeguarding requirements of EN 12604.
  • Operation: electrical operation is by means of a 240 V single-phase or 400 V three-phase Speedsafe motor mounted on one end plate. The standard controls are by means of key switch with emergency stop button fitted adjacent to the shutter.
  • Fire activation: in a fire condition, activation is initiated by an incoming signal from the fire alarm system. Closure is by gravity with a controlled descent. A pull cord and hand chain are provided for use in the event of power failure.

Applications:

Suitable for any application where fire and sound compartmentation are required. Also suited to school kitchens in multi-function school halls where regulations dictate that fire resistance is necessary, but where a sound break is also essential to avoid disruption from the kitchen staff. Larger applications include exhibition halls where its incorporation allows sound and fire resistance at a fraction of the price of other door types such as movable walls.

General information

Size

Material

Galvanized steel

Standard.

Stainless steel, 1.4301 (304) grade

Optional.

Stainless steel, 1.4401 (316) grade

Optional.

Finish

Galvanized

Standard.

Polyester powder-coated, RAL

Insert requirements.

Uniclass 2015

Pr_30_59_84_73 Roller shuttersPrimary

CAWS

L20/530 Sliding folding external doors

L20/60 Doors

L20/610 Roller shutters/ curtains

Specification data - Roller shutters

Product Reference

Fireroll Acoustic E120 Roller Shutters

Fireroll Acoustic E120 Roller Shutters Double Curtain

32 dB sound reduction.

Size

Bespoke; consult manufacturer for details and insert requirements.

Material

Galvanized steel

Standard.

Stainless steel, 1.4301 (304) grade

Optional.

Stainless steel, 1.4401 (316) grade

Optional.

Finish

Galvanized

Standard.

Polyester powder-coated, RAL

Insert requirements.

Operation

240 V, single-phase

400 V, three-phase

Accessories

None

Audiovisual warning

Heat/ smoke detectors

Standard product features

Acoustic rating:

When independently tested, the door achieved a weighted sound reduction index Rw of 25 dB (32 dB if a double curtain design is used).

Weight:

Approximately 50 kg per linear metre of width.

Product Options

Finish:

Galvanized as standard. A factory finish is available which comprises a white plastisol internal face (coil side) with the external face polyester powder-coated to a standard RAL colour.

Similar products from Bolton Gate Company