Active fire curtain barrier assemblies.
Active fire curtain barrier assembly comprising technologically advanced fire-resistant fabric barriers encased in a compact steel housing. Barriers remain invisibly retracted until activated by an alarm or detector signal, at which time they descend safely to their fire operational position.
To be compliant, fire barriers must be protected from a short circuit and or total power failure, this is achieved with the patented Total Gravity Fail-Safe (TGFS) system. Fire barriers will control the spread of fire in a building.
Applications include all building types, including domestic houses. The fire barrier is also supplied with features such as; variable speed, controlled descent, radiation reduction, smoke leakage, emergency egress and access controls.
The barrier assemblies commence movement upon initiation or any initiation, power or system failure and move to the fire operational position with site specific adjustable and synchronized velocities within the range of 0.06–0.15 m/s using the unique VarioSpeed™ function.
In the event of mains power failure, they remain retracted using their own dedicated battery back-up power supply for a pre-determined period (nominally 30 minutes). If signalled to descend during this period, they fail-safe by gravity in a controlled manner to their fire operational position. At the end of the pre-determined time delay they fail-safe by gravity in a controlled manner. This safety feature is essential to avoid dangerous guillotine/ free-fall deployment.
Fabric type is EFP™ 4/1000, a glass fibre, stainless steel wire reinforced, fabric coated with a micronized aluminium filled fire retardant polyurethane, nominal 690 g/m². Fabric in compliance with the requirements of Class 0 to meet the statutory guidance in Approved Document B (Volumes 1&2) 2006 Edition ‘Fire Safety’ to the England & Wales Building Regulations 2010.
Two sections of folded 2.0 mm (14 gauge) galvanized angles formed into a triangular shape to fit the curtain, provide stiffness and limit deflection. Bottom bars are designed of adequate size and weight to keep the curtain fully extended, taut and level when the unit is activated to the self-closing position while providing for minimal deflection caused by the buildings' air pressure currents.
Manufactured from 2.0 mm (14 gauge) galvanized plates, brackets are provided to house and support end of the barrel assembly.
Entirely enclosed the curtain and barrel assembly. Manufactured from 1.2 mm (18 gauge) galvanized steel formed to match brackets. Top and bottom shall be bent and reinforced for stiffness.
Fabricated of structural quality ERW galvanized steel seamless roller tube of sufficient size and diameter to house operating motor drive, support curtain assembly and limit horizontal deflection of the fire curtain barrier assembly.
Motor drive unit:
Inboard 24 V DC motor including gearbox assembly, electromechanical distance travel limit switches all linked to an internal 24 V DC electromagnetic brake which allows the fire curtain barrier to remain operational even during the loss of power to the motor drive unit.
Fail-safe release device:
A fail-safe release device is built into the motor drive unit as an integral part of the release mechanism. When power is interrupted to the release mechanism by an alarm condition, the fire curtain barrier shall automatically self-close. In the event of power failure, the time delay prevents the fire curtain barrier from closing for a predetermined programmable period of 30 minutes, unless there is an alarm condition at which point the fire curtain barrier immediately self-closes. Once the predetermined programmable period of 30 minutes has lapsed, the fire curtain barrier self-closes.
Once power has been restored and the alarm condition has been cleared, the release mechanism automatically resets and the fire curtain barrier immediately becomes operable.
Control units are custom made to be fully compatible with both existing alarm systems and the number of barrier units installed, whether single or multiple roller assemblies. Compliant to the Machinery Directive, EMC Directive, Low –Voltage Directive. CE Marked to BS EN 12101-10:2005 as required by the Construction Products Regulations (CPR).
Compliant to PAS 121:2007 (where applicable).
Available upon request, insert colour requirements.
L20/610 Roller shutters/ curtains
Recommended 5 mm gap between side guide and building material.
Available upon request, insert colour requirements.
Suspended ceiling with recessed shallow gap
Suspended ceiling with patented SLAT™
Self levelling access trim.
Suspended with unistrut fit
Beam protection and obstruction warning
A beam detector, with delay timer which will sound in the event of any obstruction being placed in the barrier drop line when mains or emergency power is available.
Touch button retract facility for multi-escape and emergency services entry when mains or emergency power is available.
Split drop delay
To partially deploy to pre-determined level to permit escape, and initial smoke containment. After delay fully deploys to its fire operational position when mains, or emergency power is available.
Visual alert system
Light warning system when mains or emergency power is available.
Audio or spoken multi message facility when mains or emergency power is available.
Standard product features
120 minutes (two hours) integrity.
43 minutes <15 kW/m².
230 V AC 50 Hz dedicated supply via 12 A un-switched fused spur. Backup battery: Two 12 V 12A/h lead acid batteries.
Normally closed volt-free contacts, open on activation.
Power on, alarm active and alarm off.
Power supply size (w x h x d):
400 x 500 x 210 mm.
Motor control unit size (w x h x d):
300 x 200 x 80 mm.
Available in unlimited widths and drops up to 8.0 m.
Side channels seal the fire curtain fabric and the building. Fire can cause extreme positive or negative pressures (up to 20Pa). Side guide channels are constructed from galvanized steel (available in standard RAL colours) that can be either surface mounted or recessed into the wall structure to give a flush finish.
A range of ceiling interfaces are available and can even invisibly conceal the fire curtain barriers in the ceiling whilst still allowing access for service and maintenance. All systems remain totally concealed when non-operational.
Fixing options to suit all types of ceiling configuration are available (can be integrated with both solid and suspended ceilings and will remain hidden within the ceiling until deployed).
Coopers SmokeStop® D600A
FireMaster Concertina Closed - Rectangular
FireMaster Concertina Open - L shape
FireMaster Concertina Open - Rectangular
FireMaster NVS Simplex Horizontal
FireMaster Plus NVS Simplex Horizontal
FireMaster® A1 Concertina™ Closed
FireMaster® A1 Concertina™ Closed - Circular
FireMaster® A1 Concertina™ Open - Circular
© 2020 NBS Enterprises Ltd. All rights reserved.