FireMaster® Concertina™ Egress Fire Curtain - Fire Curtain Concertina

An electrically operated FireMaster® Concertina™ A1 Egress active fire curtain barrier assembly used to form a virtually continuous barrier as a fire separating element.

The system comprise a stainless-steel reinforced glass fibre fabric, fan-folded and retained in a metal tray, powered by an internal 24 V dc electric motor, enclosed within a 1.2 mm-thick stainless steel box. Within the main curtain assembly there is an egress door allowing for evacuation of personnel and for access for fire services. The egress door may contain up to two vision panels, allowing first responders visual access to the fire side of the curtain.

A bottom tray is attached to the bottom edge of the curtain providing tension to the curtain with sufficient weight for the curtain to ‘fail-safe by gravity’.

The 24V motor contains an electromagnetic brake to arrest motion of the curtain when in the open position.

The fire curtain assembly has been tested to the requirements of BS EN 16034:2014 for ‘Durability of Self-Closing against degradation’ (500 cycles on primary power and an additional 50 cycles using back-up power; closing speed of 0.08 m/s).

The assemblies have been tested to the requirements of BS EN 1363-1: for ‘Fire Resistance’ (90 minutes) and for ‘Radiation’ (60 minutes).

Operation:

FireMaster® Concertina™ A1 Egress active fire curtain barrier assemblies commence movement upon initiation of alarm or power or system failure, and fully deploy to the fire operational position within the range of velocities of 0.06 m/s to 0.15 m/s using the unique VarioSpeed™ function.

Operating speeds are site adjustable without altering the bottom bar mass. Speeds may be dictated by those authorities having jurisdiction for ‘safety in use’ according to the location, nature or function of each unit.

In the event of a mains supply power failure, the curtain is retained in the open position for a pre-determined period (nominally 30 minutes), using battery back-up power. During this period, the Barrier assembly will deploy on receipt of a signal. At the end of the period, the Barrier assembly will deploy.

Fire resistance:

90 minutes integrity.

Radiation resistance:

60 minutes <15 kW/m².

Product certification, performance and/ or testing:

• Barrier assemblies are certified by an independent accredited certification body operating to ISO/ IEC 17065:2012.
• Barrier assemblies have been tested for fire resistance to BS EN 1634-1, as required by BS 8524-1. The barrier assembly achieved 90 minutes integrity and 60 minutes radiation.
• Complete FireMaster® Concertina™ A1 Egress active fire curtain barrier assemblies have passed tests for durability to BS EN 12605 (500 cycles), and for self-closing to BS EN 16034 (C1).
• Motor(s) used within FireMaster® A1 Egress active fire curtain barrier assemblies have been cycle tested for 50,000 operations (C3).
• Motor(s) used within FireMaster® Concertina™ A1 Egress active fire curtain barrier assemblies have passed elevated temperature operational tests to BS 8524-1:2013, Annex G.

Approving standards:

The following standards apply to this product:

• BS EN 1634-1:2014+A1:2018: Fire resistance and smoke control tests for door, shutter and, openable window assemblies and elements of building hardware. Fire resistance tests for doors, shutters and openable windows
• BS EN 1363-1:2020: Fire resistance tests – Part 1: General requirements.
• BS EN 1363-2:1999: Fire resistance tests – Part 2: Alternative and additional procedures.
• BS EN 12605:2000: Industrial, commercial and garage doors and gates. Mechanical aspects. Test methods.
• BS EN 16034:2014: Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics.
• BS 476-6:1989+A1:2009: Fire tests on building materials and structures. Method of test for fire propagation for products.
• BS 476-7:1997:, Fire tests on building materials and structures. Method of test to determine the classification of the surface spread of flame of products.
• BS EN ISO 1716: Determination of the Heat of Combustion for Building Products.
• BS 6853 Annex B.2: Toxicity.
• BS 6853 Annex D.8.4: Methods for Measuring Smoke Density.
• BS EN 14184-1: Textiles – Determination of Formaldehyde – Part 1: Free and hydrolysed formaldehyde (water extraction method).
• BS EN ISO 9001:2008: Quality management system.
• BS EN ISO 14001:2004: Environmental management system.
• BS EN ISO 45001:2018: Occupational Health and Safety Management