Fire Shutter - Fireroll E30

Half-hour fire-resisting roller shutter tested to EN 1634-1 and rated E30 in accordance with EN 13501-2, EN 13241, EN 16034 and EN 15269-10. Additionally, the shutter is rated E30 when fixed to flexible structures in accordance with EN 15269-10 Clause J.1.2, and is CE marked accordingly.

Features and benefits:

• Operation: Electrical operation is by means of a 230 V nominal single-phase Speedsafe motor mounted on one end plate. Standard operation is via a low-level push button station with emergency stop button. A pull cord and hand chain are provided for use in the event of power failure.
• Activation is via a signal from the fire alarm system to an auto reset solenoid which, when activated, releases the motor brake allowing the shutter to close by gravity with a controlled descent.
• Curtain: The shutter curtain is constructed from continuously interlocking 51 mm flat-faced laths, held securely in place by end locks.
• Bottom rail: The bottom rail is formed from a reinforced lath to give uniformity of appearance.
• Guides: vertical guides are fabricated from 50 x 25 mm cold-rolled galvanized steel channels which are attached to the supporting structure.
• Roller: The roller is manufactured from mild steel tube of sufficient diameter and wall thickness to resist deflection and is mounted in bearings on each end plate. A safety brake is included to comply with the safeguarding requirements of EN 12604.
• End plates: Fabricated from carbon steel of adequate thickness relative to door size, supplied with angles for fixing to the structure.
• Casing: A galvanized steel casing is supplied as standard to maintain the fire seal at the head.