Name: Fermacell 1HT23 Loadbearing Timber Stud Partition
Brand: James Hardie Building Products Ltd
SKU: vYpMWC22SPBmKjmJRNXNuA

Uniclass

Ss_25_10_32_90 Timber wall framing systemsPrimary

CAWS

K10/15 Lining on timber

K10/205 Lining on timber

Product Reference

Fermacell 1HT23 Loadbearing Timber Stud Partition

Timber studs

89 x 38 mm single

89 x 38 mm twin

Lining fixings

30 mm Fermacell screws at 250 mm centres on single boarded side and 30 mm Fermacell screws at 400 mm centres and 40 mm Fermacell screws at 250 mm centres on double boarded side

35 mm + Staples at 200 mm centres on single boarded side and 35 mm + Staples at 400 mm centres and 50 mm + Staples at 200 mm centres on double boarded side

Finishing

Type

Fermacell Fine Surface Treatment (FST)

Joint treatment

Fermacell Jointstik 1 mm glued joint

Square edged boards.

Fermacell Joint Filler 5–7 mm filled joint

Site cut boards.

Standard product features

Fire resistance:

30–60 minutes dependent on fire side.

Stud centres:

600 mm.

Linings:

Two layers of 12.5 mm Fermacell one side of the partition and one layer 12.5 mm Fermacell to the other side (alternative cavity side board 9 mm Sheathing Board).

Insulation:

90 mm mineral wool: 10 kg/m³.

Recycled content:

Best Fermacell gypsum fibreboard contains 100% recycled content. All by-products recyclable.

Other requirements:

Fire stopping around service penetrations: Sockets backed using baffle boxes, intumescent putty pads or suitable rock mineral wool, sufficient to maintain the fire/ acoustic performance.

Movement joints are required at maximum 8 linear metre intervals.

Refer to manufacturer's literature. Vapour barrier as required for high humidity areas.

For tiled areas reduce studs to 400 mm centres as required. Tile adhesive to be suitable for gypsum based substrate.

Provide door reinforcement as required to suit door weights and opening size. Ensure no vertical joints at door jambs.

Offset all board joints by minimum 200 mm.

Product Options

Partition performance (based on stud type and insulation density/ thickness):

- Single Stud Solution:

Height (maximum): 2.60 m.

Thickness (overall): 127 mm.

Airborne sound resistance (Rw): >46 dB.

Applied load: 5.56 kN per stud.

5–7 mm filler joint option is not suitable for use on this size of stud.

- Twin Stud Solution:

Height (maximum): 2.60 m.

Thickness (overall including cavity): 270 mm.

Airborne sound resistance (Rw): >66 dB.

Applied load: 5.56 kN per stud.

5–7 mm filler joint option is not suitable for use on this size of stud.

Inner Sheathing Board may be a timber based product. Refer to Fermacell for further technical information.

Fermacell 1HT11 Load Bearing Timber Stud Partition

Fermacell 1HT14 Loadbearing Timber Stud Wall

Fermacell 1HT22 Loadbearing Timber Stud Partition

Fermacell 1HT23 Loadbearing Timber Stud Partition

Description

General information

Uniclass

CAWS

Specification data - Timber wall framing systems

Product Reference

Fermacell 1HT23 Loadbearing Timber Stud Partition

Timber studs

89 x 38 mm single

89 x 38 mm twin

Lining fixings

30 mm Fermacell screws at 250 mm centres on single boarded side and 30 mm Fermacell screws at 400 mm centres and 40 mm Fermacell screws at 250 mm centres on double boarded side

35 mm + Staples at 200 mm centres on single boarded side and 35 mm + Staples at 400 mm centres and 50 mm + Staples at 200 mm centres on double boarded side

Finishing

Type

Fermacell Fine Surface Treatment (FST)

Joint treatment

Fermacell Jointstik 1 mm glued joint

Fermacell Joint Filler 5–7 mm filled joint

Standard product features

Product Options

Environmental information

Recycled content

Literature

Similar products from James Hardie Building Products Ltd

Standard product features	Fire resistance: 30–60 minutes dependent on fire side. Stud centres: 600 mm. Linings: Two layers of 12.5 mm Fermacell one side of the partition and one layer 12.5 mm Fermacell to the other side (alternative cavity side board 9 mm Sheathing Board). Insulation: 90 mm mineral wool: 10 kg/m³. Recycled content: Best Fermacell gypsum fibreboard contains 100% recycled content. All by-products recyclable. Other requirements: Fire stopping around service penetrations: Sockets backed using baffle boxes, intumescent putty pads or suitable rock mineral wool, sufficient to maintain the fire/ acoustic performance. Movement joints are required at maximum 8 linear metre intervals. Refer to manufacturer's literature. Vapour barrier as required for high humidity areas. For tiled areas reduce studs to 400 mm centres as required. Tile adhesive to be suitable for gypsum based substrate. Provide door reinforcement as required to suit door weights and opening size. Ensure no vertical joints at door jambs. Offset all board joints by minimum 200 mm.
Product Options	Partition performance (based on stud type and insulation density/ thickness): - Single Stud Solution: Height (maximum): 2.60 m. Thickness (overall): 127 mm. Airborne sound resistance (Rw): >46 dB. Applied load: 5.56 kN per stud. 5–7 mm filler joint option is not suitable for use on this size of stud. - Twin Stud Solution: Height (maximum): 2.60 m. Thickness (overall including cavity): 270 mm. Airborne sound resistance (Rw): >66 dB. Applied load: 5.56 kN per stud. 5–7 mm filler joint option is not suitable for use on this size of stud. Inner Sheathing Board may be a timber based product. Refer to Fermacell for further technical information.