Fastwarm® FastTile+ - XPS Underfloor Heating Insulation Board
Verified by manufacturer 24 days ago
High compressive strength 200 kpa extruded polystyrene (XPS) underfloor heating insulation board for low profile systems.
Application
- Suitable for ultra low profile retro fit installations.
- Suitable for use with all floor finishes.
Description
A high compressive strength 200 kpa XPS underfloor heating insulation board for low profile systems. It has durable cement coatings on either face that are suitable for the direct application of tiles or covering with floor leveller and covering with all suitable floor finishes.
Features and benefits:
- Provides ready-made pipe securing and spacing using pre-grooved insulated boards.
- High compressive strength insulation.
- Tile or level over primed board to accommodate all floor coverings.
- Typical outputs up to up to 76 w/m².
- 600 x 1200 x 20 mm (for 16 mm pipe).
General information
Color | Grey Purple |
Finish | Grooved |
Material | High density extruded polystyrene (XPS) |
Shape | Rectangle |
Length | 1200 mm |
Width | 600 mm |
Height | 20 mm |
Warranty description | Lifetime |
Uniclass | |
CAWS | M40/5 Tiling to M40/110 Tiling to M40/470 Intermediate substrate M40/27 Intermediate substrate |
Specification data - Extruded polystyrene (XPS) boards
Standard | To BS EN 13164. |
Fire performance | To EN 13501-1, Class E. |
Compressive strength (minimum) at 10% compression | To EN 826, >20 N/mm². |
Thermal conductivity (maximum) | To EN 13164, 0.034 W/(m-K). |
Thickness | 20 mm. |
Face size (length x width) | 1200 x 600 mm. |
Facing | Cementitious. |
Edges | Square. |
Material density | To EN 1602, >30 kg/m³. |
Dimensional stability | To EN 1604, <5%. Manufacturer guidanceAt 70°C and 90°C relative humidity. |
Deformation capability | To EN 1605, <5%. Manufacturer guidanceUnder 40 kPa load and 70°C temperature. |
Water absorption | To EN 12087, <1%. Manufacturer guidanceOn long term immersion. |
Linear thermal expansion coefficient | 0.07 mm/(m-K). |
Working temperature | -50°C to +75°C. |
Sustainability data
Material | High density extruded polystyrene (XPS) |
Literature
FastTile+ Data Sheet