Application

Can be used as a substrate for interior and exterior applications. Suitable for use on the following floor coverings:

  • Wood.
  • Vinyl.
  • Linoleum.
  • Carpets.
  • Ceramic tiles.

Also suitable for screeds enclosing heating coils.

Must be used in its original state, without the addition of other materials.

Consult manufacturer's literature for details on recommended substrate preparation and mixing instructions.

Description

Hydraulic binder for medium/ fast-drying screeds. Contains additives for mixing with suitably graded aggregate and water to make normal setting, fast-drying screeds with controlled shrinkage.

Features and benefits:

  • Quick drying time.
  • Good workability.
  • Suitable for high traffic environments, as well as renovations and new constructions.
  • High mechanical strength.
  • Suitable for use when fast repairs are required.
  • Contributes to LEED® credits.

Applications:

Can be used as a substrate for interior and exterior applications. Suitable for use on the following floor coverings:

  • Wood.
  • Vinyl.
  • Linoleum.
  • Carpets.
  • Ceramic tiles.

Also suitable for screeds enclosing heating coils.

Must be used in its original state, without the addition of other materials.

Consult manufacturer's literature for details on recommended substrate preparation and mixing instructions.

General information

Uniclass 2015

Pr_35_31_06_80 Smoothing and levelling underlay compoundsPrimary

CAWS

M10/130 Proprietary quick drying levelling screeds

M10/7 Proprietary quick drying levelling screeds

M13/10 Proprietary trowelled levelling screeds

M13/110 Proprietary trowelled levelling screeds

M40/10 Natural stone covering to

Show more
Specification data - Smoothing and levelling underlay compounds

Product Reference

FASSACEM

Standard product features

Technical characteristics:

  • Form: Grey powder.
  • Specific weight: 1000 g/L (approximately).
  • Grading: <0.1 mm.
  • Solids content: 100%.
  • Mixing ratio: 200–300 kg/m³ (dependent on desired performance).
  • Aggregate ratio: 1600–1900 kg/m³ (dependent on desired performance).
  • Mixing water required: 120–150 L per m³ of product (dependent on aggregate type).
  • Working time: 60 minutes (approximately).
  • Application thickness: Bonded: 20 mm; floating: 35 mm.
  • Flexural strength: After 1 day: 3 MPa (approximately); after 7 days: 5 MPa; after 28 days: 8 MPa.
  • Compressive strength: After 1 day: 12 MPa (approximately); after 7 days: 20 MPa; after 28 days: 35 MPa.
  • Ready for foot traffic: After 12 hours.
  • Laying of tiles: After 24 hours.
  • Laying of wooden flooring: After 4 days.

Literature
Similar products from Fassa UK Ltd