Excel® Warm Roof Multi Layer System - Concrete Roof Slab (In-situ/ Pre-cast) / Timber Roof Deck / Profiled Metal Deck

VAP ALU ADH.

Guidance for specification option:

VAP ALU ADH is an air and vapour control layer (AVCL) with sand on the surface and a self adhesive undersurface. 

• Width: 1 m.
• Length: 8 m.
• Weight: 3.1 kg/m².

Hytherm ADH.

Guidance for specification option:

Hytherm ADH PIR insulation is a high performance board used in warm roofs under fully adhered reinforced bituminous membranes. For use on new roofs, refurbished roofs or for upgrading the thermal performance of existing roofs.

• Type: Rigid expanded polystyrene (EPS) flat and tapered boards.
• Facing: Coated glass tissue facing.
• Board sizes:(small) 600 x 1200 mm, (large) 1200 x 1200 mm.
• Thicknesses (flatboard): 25 - 150mm (also available in tapered).
• Thermal conductivity: 0.026 - 0.024W/m.K (may vary, dependent on thickness).
• Compressive strength: >150kPA at 10% compression.

Hytherm ADH Tapered.

Guidance for specification option:

High performance board comprises a fibre-free, rigid polyisocyanurate (PIR) core with a coated glass tissue facing on both sides. See guidance on Flatboard.

Hytherm BF.

Guidance for specification option:

Designed to provide optimum stability and structural integrity.

• Type: Fibre-free, rigid polyisocyanurate (PIR).
• Facing: Top: coated glass tissue facing on one side. Underside: bitumen glass tissue with polypropylene fleece.
• Standard board sizes:1200 x 600 mm.
• Standard board thickness: 30mm – 150 mm.
• Thermal conductivity: 0.26W/m.K - 0.024W/m.K.
• Compressive strength: >150kPa at 10% compression.

Hytherm CG.

Guidance for specification option:

Robust, non-combustible insulation material manufactured from specially graded recycled glass (>60%) and natural raw materials such as sand, lime, dolomite. Available in tapered.

• Face: upper bitumen layer covered with a PE foil.
• Lower: White glass fleece
• Density: 100 kg/m².
• Board size: 1200 x 600 mm.
• Thickness (Flatboard): 50mm - 180mm.
• Thermal conductivity: <0.036 W/mK (may very, dependent on thickness specified).
• Compressive strength: > 500 kPa.

Hytherm CG Tapered.

Guidance for specification option:

Cut to falls insulation is a robust, non-combustible insulation material that can play a crucial role in the fire safety of a building as well as providing long-lasting thermal performance in a flame free (self adhesive or adhered) or torch-applied warm roof waterproofing system.

Hytherm EPS.

Guidance for specification option:

Axter Hytherm EPS ADH is a durable, lightweight, rigid expanded polystyrene (EPS) insulation available in both uniform and tapered boards for use in warm flat roofs with limited access and balconies and terraces with regular pedestrian traffic.

• Type: lightweight, rigid expanded polystyrene (EPS) flat and tapered boards.
• Facing: laminate.
• Board sizes: Flatboard 1200 x 1200, 1200 x 900,1200 x 600 mm.
• Tapered: 1200 x 1200, 1200 x 900, 1200 x 600 mm.
• Thicknesses (flatboard & tapered): 25 - 600mm.
• Thermal conductivity: 0.035- 0.033W/m.K (may vary, dependent on thickness)
• Compressive strength: <500kPA at 10% compression.

Hytherm MW.

Guidance for specification option:

Excellent acoustic reduction, absorption and impact (rain noise) performance. Manufactured from renewable volcanic stone.

• Type: Mineral wool flatboard or tapered insulation.
• Facing: Mineral coated glass fibre fleece with tissue facing .
• Board size: 1200 x 1000 mm.
• Thickness (Flatboard): 30mm, 60mm, 85mm, 105mm, 115mm, 150mm, 185 mm.
• Thermal conductivity: 0.039 W/mK (may very, dependent on thickness specified).
• Compressive strength: > 65 kPa.

Hytherm MW Tapered.

Guidance for specification option:

Cut to falls insulation uniquely versatile insulation solution suitable for all roof covering types – torch applied, pour and roll, single ply, cold applied liquid, EPDM and living roofs. HYTHERM MW roofing boards provide unique tested solutions for fire, thermal and acoustic roofing systems for all building types. See guidance on MW.

Hytherm EPS Tapered.

Hyrastik EVO.

Guidance for specification option:

Single-component, high performance, moisture-curing polyurethane insulation adhesive.

VAP-ALU ADH Self Adhered.

Guidance for specification option:

Installed fully bonded with fully sealed joints using self-adhesive technique to form a continuous layer. Broof(t4) Certified.

Excel Capping Sheet.

Guidance for specification option:

Torch-applied, reinforced Alpa Polymer modfied self-finished bitumen waterproofing membrane. 

• Width: 1 m.
• Length: 8 m.
• Weight: 5 kg/m².
• Surface: top: Mineral slate or granules 100-1200g/m²; bottom: thermofusible film 10g/m².
• Reinforcement binder: Alpa -mix 3800g/m².
• Cold bending test: -30°C.
• Softening point: >110°C.
• Tensile strength: length 600 N/50 mm; transverse >600 N/50 mm.
• Elongation at break: length >35%; transverse >35%.

35 PY Angle Reinforcement.

Guidance for specification option:

35 PY ANGLE REINFORCEMENT is a polyester reinforced SBS elastomeric membrane. Minimal thickness is 3.5 mm.

Hyranger Spot ADH.

35 PY Angle Reinforcement.

Guidance for specification option:

Polyester reinforced SBS elastomeric membrane. 

• Minimal thickness is 3.5 mm.
• 10 x 0.25 m with an average weight of 11 kg .
• 10 x 0.33 m with an average weight of 15 kg.

Axter 35 PY Angle Reinforcements fully bonded in accordance with Axter Ltd recommendations.

Axtrim.

Guidance for specification option:

Manufactured from extruded aluminium alloy to BS 1474, Quality 6065/T6 (AIMgSi 0.5 F22), this high quality, cost-effective roof edge trim brings a neat finish to flat roof waterproofing.

Axtrim aluminium termination bars.

Guidance for specification option:

Axtrim aluminium termination bars are manufactured from extruded aluminium alloy to BS 1474, Quality 6065/T6 (AIMgSi 0.5 F22). Aluminium termination bars will not rust and are not affected by atmospheric pollution. They are colourfast and maintenance free, once installed.

Axtrim GRP termination bars.

Guidance for specification option:

Axtrim GRP termination bars are manufactured from pultruded GRP (glass reinforced polyester). It is UV protected and has low coefficient of thermal expansion. GRP termination bars will not rust and are not affected by atmospheric pollution. They are colourfast and maintenance free, once installed.

Rainwater outlets.

Guidance for specification option:

Axter rainwater outlets are manufactured from 0.7mm stainless steel in a choice of diameters, with a factory bonded flange if required to provide an excellent bonding area with the relevant Axter waterproofing system.

SBS bitumen membrane flange 500mm square suitable for use with the full range of Axter reinforced bitumen membrane (RBM) and hot melt structural waterproofing systems. On our Dual Outlet a bitumen flange is fitted at AVCL level. Axter parapet outlets are manufactured from 0.7mm stainless steel in a choice of diameters, with a factory bonded flange if required to provide an excellent bonding area with the relevant Axter waterproofing system.

SBS bitumen membrane flange 500mm square suitable for use with the full range of Axter reinforced bitumen membrane (RBM) and hot melt structural waterproofing systems. On our Dual Outlet a bitumen flange is fitted at AVCL level.

PVC membrane flange 350mm square suitable for use with Axter Ecoflex/Ecoline PVC single ply waterproofing systems.

Sump outlet.

Guidance for specification option:

Specifically designed for through walls applications or parapets where a high flow rate is required and are supplied with our Hyflow leaf guard as standard. AXTER sump outlet has an outstanding flow rate of 6.1 L/s. As recommended by UK design standard BS EN 12056:3-2000 with a water depth of 35 mm.

Wide parapet outlet.

Guidance for specification option:

Used where an increased flow rate (2.02 L/s) is required. A 90° pipe angle and extra-large leaf guards are also available to be used with this unit.

Universal leaf guard.

Guidance for specification option:

The stainless steel universal leaf guard is a solid and effective leaf guard which securely clamps to the inside of the outlet stem. Suits all sizes of rainwater outlets.

Parapet leaf guard.

Guidance for specification option:

The parapet leaf guard is a solid and effective leaf guard which is securely attached to the inside of the outlet and is fully adjustable to fit all three parapet outlet sizes.

Hyflow leaf guard.

Guidance for specification option:

The 1.4301 (304) grade stainless steel Hyflow leaf guard is a high performance leaf guard designed to be used with Axter rainwater outlets. Its use increases flow rate by over 50% compared to standard leaf guards.

Self Protected Excel Capping Sheet.

Lightning conductor clips.

Guidance for specification option:

Axter lightning conductor clips provide excellent resilience and repellent characteristics, keeping them from fading and going brittle in sunlight. They are simple to install and are supplied as a one-piece unit. Colour is dark grey.

Rooflights/ access hatches.

Guidance for specification option:

Consult manufacturer for details.

Solar PV Flex.

Guidance for specification option:

Flexible thin-film photovoltaic system combining CIGS (Copper Indium Gallium Selenide) panels bonded to Axter waterproofing membrane Axter SOLAR PVFLEX flexible, thin-film photovoltaic system is a lightweight integrated solution where the solar PV module and the waterproofing are combined, and the PV module is secured to the roof system without the need for mechanical restraint and penetration of the waterproofing layer.

Interim and final roof inspections by AXTER Quality Assurance (QA) personnel. Final roof inspections by AXTER Quality Assurance (QA) personnel are mandatory for guarantee application.