Compare

EP701PF Hook-Up Elite Prime - Remote Mounted

Name: EP701PF Hook-Up Elite Prime - Remote Mounted
Brand: Hattersley
SKU: m4NuAJ6Kvfxk2eKdT7py2w

Verified by manufacturer 9 days ago

DN15/15: Fig. EP701P

DZR brass pressure independent control valve with drain and flow measuring device, PN16.

Jump to:

Application

Suitable as valve assembly for fan-coil or terminal unit.

DZR brass pressure independent control valve with drain and flow measuring device, PN16.

Features and benefits:

Compact, pre-fabricated unit – now available with Elite Prime PICV with a wide range of settable flows to suit all applications.
All valves are subject to both a pressure test, in accordance with BS EN 12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1.
The test provides reassurance of performance and accuracy within each valve.
Provides accurate flow rates and differential pressure control, as well as flow measurement (EP701PF) with system flushing and isolation.
DZR H Body tested to 3.1 x Design Working Pressure (DWP) and bronze H Body tested to 3.9 x DWP during development for design robustness.
Tested to EN12516-2 to comply with the Pressure Equipment Directive (PED).
Fully assembled and factory tested unit reduces installation time, costs and specification risks.
Available with or without extension stems to suit customer specification.
On-Off, modulating or feedback actuators are available separately to match specification.
Available in 400 kPa and 800 kPa rated variants.
Valve assembly will be labelled to include the terminal unit reference number and flow rate.
Preassembled to the requirements of each individual terminal unit, to include a flushing by-pass with integral isolation valves.

Color	Yellow Guidance for specification option: Body assembly. Green Guidance for specification option: Lever. Blue Guidance for specification option: Downstream flow set point indicator. Red Guidance for specification option: Upstream flow set point indicator. Grey Guidance for specification option: Regulator cap and stem.
Material	Brass Guidance for specification option: Body assembly. Rubber Guidance for specification option: Sealing gasket and O-rings. Plastic Guidance for specification option: Set point indicators and cap.

Uniclass	Pr_65_54_40_16 Irrigation control valvesPrimary
CAWS	S90/650 Flow reducing/ servicing valves S90/650 Flow-reducing/ servicing valves S92/435 Sprinkler valve sets S92/435 Control valve sets

Regulating function	Flow rate.
Operation	Non-autonomous.
Connections	Flushing bypass body: BSP Parallel, Strainers and tailpieces: BSP Taper.

Inlets/outlets diameter	DN15/15. Manufacturer guidance Nominal.
Dimensions	160 x 138 x 60 x 67 mm. Manufacturer guidance Nominal A x B x C x D.
Weight	2.0 kg.
PressureRange	Temperature: -10 to +100°C: 16 bar.
Integral accessories	Flushing bypass with isolation valves, PICV with low to high flow options, flow measuring device, extended handles for chilled water applications, drain and pressure test points.
Material (all components)	Bypass H-body and Fig. 1934 PICV: DZR brass BS EN 12165 (CW602N), Tailpiece and Fig. 1000 FMD: DZR brass BS EN 12164 (CW602N), D342 drain: Bronze BS EN 1982 (CC491K).
Optional accessories	Not required. On-Off actuator. Modulating actuator. Feedback actuator. Manufacturer guidance Available separately to match specification.