Verified by manufacturer 4 days ago
Composite decking that perfectly replicates prime oak.
Use Millboard decking for all standard outdoor flooring applications (e.g. in residential, commercial, education, healthcare, leisure and hospitality) including:
Millboard can be used as the decorative face for most outdoor designs, as long as it is fixed to a structural element.
Installation:
Millboard decking boards should be installed with a 4 mm gap between the boards and a 1 mm gap at the butt ends, to facilitate drainage. There is no need for a ventilation gap to be left under the Millboard decking boards. The maximum unsupported overhang for the boards is 50 mm, each cut board must be supported by a minimum of three joists. Each board must be screwed down with 2 x Millboard Durafix® stainless steel screw fixings where a board crosses a joist, and 3 x Millboard Durafix® stainless steel screw fixings at the ends of the boards. All installation recommendations set out in the installation guide found on the manufacturer's website.
Ground-level application (soft surface):
Millboard decking boards installed over DuoSpan 99 mm Joists and Beams, Beams supported by Plas-Pro Posts concreted into the ground. Installed with DuoSpan brackets to the recommendations set out in the installation guide found on the manufacturer's website.
Hard surfaces application (roof terrace, concrete base):
Millboard decking boards installed over DuoSpan Joists, Joists supported by DuoLift joists supports onto a solid/stable base. Installed with DuoSpan brackets to the recommendations set out in the installation guide found on the manufacturer's website.
Joist spacing:
Enhanced Grain boards need to be supported at 400 mm centres for residential applications. Commercial applications, bridges, balconies and steps must have 300mm joist spacings.
Moulded from timbers that are selected from oak boards for a textured look and feel, the Enhanced Grain collection's contemporary design accurately recreates the subtle nuances of natural wood. Each of the shades are slip-resistant and showcase their organic patinas beautifully
The structural core of Millboard decking is a blend of natural minerals bonded in a polymer resin, with long fibre reinforcement for mechanical strength and durability. The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage.
Features and benefits:
Color | Brown Guidance for specification option: Coppered Oak Antique Oak Black Guidance for specification option: Burnt Cedar Beige Guidance for specification option: Ashwood Cream Guidance for specification option: Limed Oak Gold Guidance for specification option: Golden Oak |
Finish | Smooth Guidance for specification option: Smooth woodgrain finish. Moulded from hand selected prime oak masters. |
Material | Composite Guidance for specification option: Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished. |
Shape | Rectangle |
Length | 3600 mm |
Width | 176 mm 126 mm |
Height | 32 mm |
Warranty description | 25 year Guidance for specification option: 25 Year Limited Structural Decking Warranty (Residential Only) Ten year Guidance for specification option: 10 Year Limited Structural Decking Warranty (anything other than residential) |
Material | Composite Guidance for specification option: Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished. |
Uniclass | |
CAWS | Q55/110 Deck Q55/380 Deck boards |
Profile | Solid decking board. |
Finished size | |
Section | 176 x 32 mm.126 x 32 mm. |
Length | 3600 mm. |
Colour | Antique Oak. Ashwood. Brushed Basalt. Burnt Cedar. Coppered Oak. |
Fixings | Millboard Durafix® stainless steel T15 decking screws 4.5 x 60 mm. Millboard Durafix® stainless steel T15 decking screws 4.5 x 45 mm. Millboard Durafix® stainless steel T15 fascia screws 4.5 x 35 mm. |
Sub frame | DuoSpan 51 mm Joist. DuoSpan 99 mm Joist. Plas-Pro 50 x 50 mm Joist. Plas-Pro 125 x 50 mm Joist. Plas-Pro 60 x 30 mm Batten. |
Joist supports | DuoLift 15-60 mm Joist Cradle. DuoLift 20 mm Self-Levelling Joint. DuoLift 45 mm Riser. DuoLift 45 mm Foot. DuoLift Acoustic Separation Pad. |
Surface finish | Smooth woodgrain finish. |
Edges | Square. |
Spacing | 400 mm centres. Guidance for specification option: For residential applications. 300 mm centres. Guidance for specification option: For commercial applications. Manufacturer guidanceJoist spacing. |
Board | 4 mm gap between boards. Guidance for specification option: 1 mm gap at the ends of the boards. Manufacturer guidanceBoard spacing. |
Slip resistance | To BS 7976-2:2002+A1:2003 using slider 96, 36-42 (Wet) 49-60 (Dry). |
Resistance | IEC 62631-3-23, 6.5E+10 Ω/sq (6.4 x 10⁹). Manufacturer guidanceSurface static resistance. |
Abrasion resistance | To BS EN ISO 7784-2:2006, 261 mg. Manufacturer guidanceTaber abrasion. |
Resistance to static indentation (reinforced) | MOAT 27:1983, 0.1 mm. |
Soft body | MOAT 43:1987, 0 mm. |
Hard body | MOAT 43:1987, 0 mm. |
ThermalConductivity | 0.084 W/m·K. Guidance for specification option: When tested with FOX 200 heat flow meter. |
Impact resistance after UV aging - 1000 h - 10 mm | To BS EN 13245-1:2010. Guidance for specification option: No cracking or damage to topcoat. |
Top layer | Lastane® layer. Guidance for specification option: The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage. |
Accessories | Flexible Bullnose edging. Flexible square edging. Bullnose board. Fascia. |
Country of material origin | United Kingdom Guidance for specification option: Material origin varies however is within UK and Europe. |
Country of product manufacture | United Kingdom |
Material | Composite Guidance for specification option: Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished. |
Manufacturing plant location | Ryton-on-Dunsmore, Coventry CV8 3EJ, UK |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 34 kg CO₂ eq/unit |
Recyclability | Guidance for specification option: Not currently recycled but upcycled and used as path edging, planters, seating and other outdoor creations. Municipal incineration of Millboard provides effective energy recovery. |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 38 % Guidance for specification option: Over a third of the raw materials used for making the structural core of Millboard is recycled. |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
- | 5 | |
- | 3 |