Encore
Description

Worktop/ slab end:

Encore is from the generic Solid Surface worksurface family and as such benefits from a seamless jointed finish and can be installed with under-mount sinks. Available with factory semi-matt 320 grit surface finish. Manufactured from 5 mm compression moulded polyester face with a blend of polymer resins reinforced with glass fibre, reaction to fire rating of B-s1, d0, the backing laminate has a reaction to fire of D-s2, d0 and conforms to BS EN: 438. Substrate: 38 mm particleboard conforms to BS EN: 312 2010 (P2) and is tested and certified to E1 emission standards and adhering to EU Timber regulations.

Worksurfaces are edged three sides, one long, two short, featuring a 3 mm radius for 44 mm and a 1 mm pencil radius for 27 mm. Breakfast bars are edged four sides with a 1000 mm radius bow and square end. Slab ends are edged on one long edge only.

Splashback:

Available with factory semi-matt 320 grit surface finish. Manufactured from 5mm reinforced compression moulded polyester with a blend of polymer resins, reinforced with glass fibre reaction to fire rating of B-s1, d0.

Upstand:

Available with semi-matt 320 grit finish with prepared top edge radius profile. Manufactured from 12 mm solid reinforced compression moulded acrylic (with no substrate) with a blend of polymer resins, reaction to fire rating of B-s1, d0.

Adhesives:

- BB colour-matched adhesive:

BB colour-matched adhesive is a high performance, single part, and moisture curing hybrid adhesive. It is used for beading. The adhesive is supplied in 80 and 290 ml cartridges.

- BB Complete:

BB Complete is a high performance, single part, moisture curing hybrid adhesive. This is used for bonding splashbacks. The adhesive is supplied in 290 ml cartridges.

Guarantee:

Consult manufacturer for full warranty details.

  • Ten-year guarantee for the Encore worksurfaces.
  • Three-year guarantee for joints using BB Complete and BB colour-matched adhesive.

General information

Uniclass 2015

Pr_40_30_30_18 CountertopsPrimary

CAWS

N11/20 Worktops

N11/340 Worktops

Specification data - Countertops

Product Reference

Encore

Type

Breakfast bar, 2400 x 900 x 44 mm

Hob splashback, 1200 x 1200 x 5 mm

Midway splashback, 4100 x 600 x 5 mm

Slimline breakfast bar, 2400 x 900 x 27 mm

Slimline island, 2400 x 1200 x 27 mm

Slimline worksurface, 4100 x 650 x 27 mm

Slimline worksurface/ slab end, 2000 x 650 x 27 mm

Upstand, 3600 x 100 x 12 mm

Worksurface, 3000 x 650 x 44 mm.

Worksurface, 4100 x 650 x 44 mm

Worksurface/ slab end, 2000 x 650 x 44 mm

Edge strips

Not required

1350 x 1.7mm, radius edge strip for 27 mm

1350 x 1.7 mm, radius edge strip for 44 mm

1350 x 5 mm, for 44 mm

2400 x 5 mm, for 44 mm

Colour/ Finish

See 'Options' below and insert requirements.

Adhesive

BB colour-matched adhesive

See 'Options' below and insert colour requirements.

BB Complete adhesive

Colour: neutral.

Standard product features

Backing:

Work surfaces are balanced with 0.8 mm high pressure decorative white laminate.

Product Options

Colour/ Finish:

Not all colours available for all products, consult technical literature for details.

- Slimline 27 mm worksurface, upstand and splashback:

  • Black sparkle.
  • Caramel glass.
  • Espresso glass.
  • Ice.
  • Ivory glass.
  • Mocha stone.
  • Mountain haze.

- 44 mm worksurface, upstand and splashback:

  • Black sparkle.
  • Calico.
  • Chocolate sparkle.
  • Cinnamon.
  • Crystal black.
  • Crystal glass.
  • Crystal white.
  • Glacier.
  • Lava.
  • Pearl grey.
  • Storm.

Adhesive:

- BB colour-matched adhesive:

  • Ash grey.
  • Basalt grey.
  • Chocolate.
  • Fudge.
  • Ice white.
  • Ivory.
  • Jet black.
  • Mushroom.
  • Pewter grey.

Similar products from Bushboard Limited